https://wiki.nanofab.ucsb.edu/w/api.php?action=feedcontributions&feedformat=atom&user=Mehalana+v 2026-04-19T11:49:04Z User contributions MediaWiki 1.43.6 https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=163208 2025-08-12T21:12:20Z

<p>Mehalana v: /* E-Beam #2 is down - Update */</p> <hr /> <div>&lt;startfeed /&gt;<br /> =====Oxford Flexal=====<br /> The PM is proceeding slower than expected. As such, I currently anticipate that the tool will be available for use by the end of the day on Friday.<br /> <br /> Sorry for any inconvenience this may cause.<br /> <br /> Thanks<br /> Bill Millerski<br /> //[[User:Mehalana v|Vraj Mehalana]] 21:12, 12 August 2025 (UTC)<br /> <br /> =====E-Beam #2 is down - Update=====<br /> The replacement cyro pump had a leak in the N2 purge connection. After that was sorted out I was able to get the cryo going. However, it appears there is an issue with this cryo as it is pumping very slow. I am going to let it pump overnight but will most likely change it out in the morning. As of right now, no ETA on when the tool will be available.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 21:14, 4 August 2025 (UTC)<br /> <br /> =====ALD: Chamber 1=====<br /> I will be back on Thursday. In the meantime, the users can run the BDEAS recipe on the other chamber.<br /> //[[User:Mehalana v|Vraj Mehalana]] 21:13, 4 August 2025 (UTC)<br /> <br /> =====MLA Up=====<br /> The MLA is up, service has finished. OptAF is in-spec, but PneuAF currently has a shift down to -18 defocus - you will need to adjust your focus via FEM calibration.<br /> //[[User:Mehalana v|Vraj Mehalana]] 21:13, 4 August 2025 (UTC)<br /> <br /> =====EBeam1 is UP=====<br /> EBeam1 is back UP<br /> <br /> Late this morning, the hoist motor was finally delivered, and as soon as it arrived I started the installation. <br /> I then tested the Egun operation due to the new high voltage feed throughs that were installed earlier this week.<br /> <br /> All tests were completed without issue. System UP.<br /> // 04:23, 25 July 2025 (UTC)<br /> <br /> ===== SignupMonkey + Wiki: Off-Campus Access=====<br /> Due to a DDoS attack affecting the Signupmonkey server, we have restricted access to the website to US locations only, including both the Nanofab Wiki and Signupmonkey.<br /> <br /> If you are off-campus and experiencing issues, please utilize the UCSB VPN to access our sites. Here are the installation instructions for VPN on your device. You will need your UCSB NetID for download and installation - you would have received a UCSB NetID when you started using the NanoFab: <br /> <br /> https://it.ucsb.edu/ivanti-secure-access-campus-vpn/get-connected-campus-vpn<br /> <br /> -- Vraj<br /> // [[User:John_d|Demis D. John]] 20:08, 22 April 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> This tool is down indefinitely. We are sourcing manual bonding fixtures, and already have a 1cm bonding fixture for NanoFab users to use - please contact [[Demis D. John]] for more information.<br /> // [[User:John_d|Demis D. John]] 04:28, 5 August 2025 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=163166 2025-08-04T21:14:33Z

<p>Mehalana v: /* ATLD: Chamber 1 */</p> <hr /> <div>&lt;startfeed /&gt;<br /> =====E-Beam #2 is down - Update=====<br /> The replacement cyro pump had a leak in the N2 purge connection. After that was sorted out I was able to get the cryo going. However, it appears there is an issue with this cryo as it is pumping very slow. I am going to let it pump overnight but will most likely change it out in the morning. As of right now, no ETA on when the tool will be available.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 21:14, 4 August 2025 (UTC)<br /> =====ALD: Chamber 1=====<br /> I will be back on Thursday. In the meantime, the users can run the BDEAS recipe on the other chamber.<br /> //[[User:Mehalana v|Vraj Mehalana]] 21:13, 4 August 2025 (UTC)<br /> <br /> =====MLA Up=====<br /> The MLA is up but unavailable for most of the day.<br /> //[[User:Mehalana v|Vraj Mehalana]] 21:13, 4 August 2025 (UTC)<br /> <br /> =====EBeam1 is UP=====<br /> EBeam1 is back UP<br /> <br /> Late this morning, the hoist motor was finally delivered, and as soon as it arrived I started the installation. <br /> I then tested the Egun operation due to the new high voltage feed throughs that were installed earlier this week.<br /> <br /> All tests were completed without issue. System UP.<br /> // 04:23, 25 July 2025 (UTC)<br /> <br /> ===== SignupMonkey + Wiki: Off-Campus Access=====<br /> Due to a DDoS attack affecting the Signupmonkey server, we have restricted access to the website to US locations only, including both the Nanofab Wiki and Signupmonkey.<br /> <br /> If you are off-campus and experiencing issues, please utilize the UCSB VPN to access our sites. Here are the installation instructions for VPN on your device. You will need your UCSB NetID for download and installation - you would have received a UCSB NetID when you started using the NanoFab: <br /> <br /> https://it.ucsb.edu/ivanti-secure-access-campus-vpn/get-connected-campus-vpn<br /> <br /> -- Vraj<br /> // [[User:John_d|Demis D. John]] 20:08, 22 April 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=163165 2025-08-04T21:13:17Z

<p>Mehalana v: /* MLA is down */</p> <hr /> <div>&lt;startfeed /&gt;<br /> =====ATLD: Chamber 1=====<br /> I will be back on Thursday. In the meantime, the users can run the BDEAS recipe on the other chamber.<br /> //[[User:Mehalana v|Vraj Mehalana]] 21:13, 4 August 2025 (UTC)<br /> =====MLA Up=====<br /> The MLA is up but unavailable for most of the day.<br /> //[[User:Mehalana v|Vraj Mehalana]] 21:13, 4 August 2025 (UTC)<br /> <br /> =====EBeam1 is UP=====<br /> EBeam1 is back UP<br /> <br /> Late this morning, the hoist motor was finally delivered, and as soon as it arrived I started the installation. <br /> I then tested the Egun operation due to the new high voltage feed throughs that were installed earlier this week.<br /> <br /> All tests were completed without issue. System UP.<br /> // 04:23, 25 July 2025 (UTC)<br /> <br /> ===== SignupMonkey + Wiki: Off-Campus Access=====<br /> Due to a DDoS attack affecting the Signupmonkey server, we have restricted access to the website to US locations only, including both the Nanofab Wiki and Signupmonkey.<br /> <br /> If you are off-campus and experiencing issues, please utilize the UCSB VPN to access our sites. Here are the installation instructions for VPN on your device. You will need your UCSB NetID for download and installation - you would have received a UCSB NetID when you started using the NanoFab: <br /> <br /> https://it.ucsb.edu/ivanti-secure-access-campus-vpn/get-connected-campus-vpn<br /> <br /> -- Vraj<br /> // [[User:John_d|Demis D. John]] 20:08, 22 April 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=163149 2025-07-28T23:51:26Z

<p>Mehalana v: /* EBeam1 is UP */</p> <hr /> <div>&lt;startfeed /&gt;<br /> =====MLA is down=====<br /> After some troubleshooting and a bunch of back and forth with HIMT, we have concluded that there is a mechanical failure in the Z drive for the writehead. This will require the writehead to be replaced for which I do not have an ETA. I'll update everyone once I know more.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 23:51, 28 July 2025 (UTC)<br /> =====EBeam1 is UP=====<br /> EBeam1 is back UP<br /> <br /> Late this morning, the hoist motor was finally delivered, and as soon as it arrived I started the installation. <br /> I then tested the Egun operation due to the new high voltage feed throughs that were installed earlier this week.<br /> <br /> All tests were completed without issue. System UP.<br /> // 04:23, 25 July 2025 (UTC)<br /> <br /> ===== SignupMonkey + Wiki: Off-Campus Access=====<br /> Due to a DDoS attack affecting the Signupmonkey server, we have restricted access to the website to US locations only, including both the Nanofab Wiki and Signupmonkey.<br /> <br /> If you are off-campus and experiencing issues, please utilize the UCSB VPN to access our sites. Here are the installation instructions for VPN on your device. You will need your UCSB NetID for download and installation - you would have received a UCSB NetID when you started using the NanoFab: <br /> <br /> https://it.ucsb.edu/ivanti-secure-access-campus-vpn/get-connected-campus-vpn<br /> <br /> -- Vraj<br /> // [[User:John_d|Demis D. John]] 20:08, 22 April 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=163142 2025-07-24T16:05:04Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> =====EBeam1 still Down=====<br /> Unfortunately EBeam1 will remain down until further notice.<br /> All parts and repairs have been completed except for the replacement of the hoist motor.<br /> The new hoist motor has still not been delivered.<br /> <br /> When I receive the new hoist motor, I will install it and test all system functions prior to releasing the tool.<br /> <br /> I apologize for the inconvenience.<br /> //[[User:Mehalana v|Vraj Mehalana]] 16:05, 24 July 2025 (UTC)<br /> <br /> ===== New Raith EBL: tool up =====<br /> It appears that the combination of higher beam currents than usual (we did after all upgrade our EBL capabilities for the purpose of higher throughput at much higher beam currents) and the particular (extremely sparse) stitch patterns we use to measure stitch accuracy revealed a subtle limitation in the Fine Focus coil used in their systems (the Fine Focus coil adjusts focal point on the substrate as the beam is deflected around the 1mm field). <br /> We are working with the tool designers in Eindhoven as well as the service team in the US to “fix” this issue. However, in the meantime, we understand and recognize the problem sufficiently to address it if it comes up in real day-to-day usage. <br /> <br /> We will be signing off on the tool tomorrow morning at which point the tool will be available for '''general EBL use to our nanofab community'''. I will be working with a few experienced users in the next couple of days and then will be reaching out to a wider audience to get more of you trained. -- Bill Mitchell<br /> // [[User:John_d|Demis D. John]] 16:28, 2 July 2025 (UTC)<br /> <br /> ===== SignupMonkey + Wiki: Off-Campus Access=====<br /> Due to a DDoS attack affecting the Signupmonkey server, we have restricted access to the website to US locations only, including both the Nanofab Wiki and Signupmonkey.<br /> <br /> If you are off-campus and experiencing issues, please utilize the UCSB VPN to access our sites. Here are the installation instructions for VPN on your device. You will need your UCSB NetID for download and installation - you would have received a UCSB NetID when you started using the NanoFab: <br /> <br /> https://it.ucsb.edu/ivanti-secure-access-campus-vpn/get-connected-campus-vpn<br /> <br /> -- Vraj<br /> // [[User:John_d|Demis D. John]] 20:08, 22 April 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=File:Facility-Use-MOU---Intercampus-UC-User.pdf&diff=163129 2025-07-17T18:49:00Z

<p>Mehalana v: Mehalana v uploaded a new version of File:Facility-Use-MOU---Intercampus-UC-User.pdf</p> <hr /> <div>== Summary ==<br /> Intercampus U.C. User - Facility Use Memorandum of Understanding, for &quot;Getting Lab Access&quot;<br /> [[Category:Services]]</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=File:UCSB_Service_Agreement.pdf&diff=163128 2025-07-17T18:48:43Z

<p>Mehalana v: Mehalana v uploaded a new version of File:UCSB Service Agreement.pdf</p> <hr /> <div>== Summary ==<br /> UCSB Service Agreement, for Remote Fabrication Services section of Nanotech website.<br /> [[Category:Services]]</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=File:UCSB-Facilities-Use-Agreement.pdf&diff=163127 2025-07-17T18:48:20Z

<p>Mehalana v: Mehalana v uploaded a new version of File:UCSB-Facilities-Use-Agreement.pdf</p> <hr /> <div>== Summary ==<br /> Facilities Use Agreement, for &quot;Getting Lab Access&quot;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=163067 2025-05-21T21:48:44Z

<p>Mehalana v: /* Bench 3 down on Wed 5/20 */</p> <hr /> <div>&lt;startfeed /&gt;<br /> =====Dry Etch, Si Deep RIE (PlasmaTherm DSEIII) - IMPORTANT: Please Read!=====<br /> We will be taking down the DSE to changeout the turbo pump next Wednesday (5/28). If all goes well the tool should only be down for the day. I’ll keep you updated with emails.<br /> // [[User:Mehalana v|Vraj Mehalana]] 21:48, 21 May 2025 (UTC)<br /> =====Bench 3 down on Wed 5/20=====<br /> Solvent Bench #3 will be down tomorrow from 9am to noon. I will be replacing the Ultrasonic sink that has been down for sometime. I believe I have pinpointed the problem and will hopefully have it up and running ASAP. I sincerely apologize for the down time.<br /> Regards,<br /> Michael Day<br /> // [[User:John_d|Demis D. John]] 01:54, 21 May 2025 (UTC)<br /> <br /> =====Raith Velion UP=====<br /> Raith service has resolved all issues with the Velion FIB and the tool is up and available for general use. Work to align and calibrate all relevant column modes will begin the week starting May 12th.// [[User:John_d|Demis D. John]] 22:38, 13 May 2025 (UTC)<br /> <br /> ===== SignupMonkey + Wiki: Off-Campus Access=====<br /> Due to a DDoS attack affecting the Signupmonkey server, we have restricted access to the website to US locations only, including both the Nanofab Wiki and Signupmonkey.<br /> <br /> If you are off-campus and experiencing issues, please utilize the UCSB VPN to access our sites. Here are the installation instructions for VPN on your device. You will need your UCSB NetID for download and installation - you would have received a UCSB NetID when you started using the NanoFab: <br /> <br /> https://it.ucsb.edu/ivanti-secure-access-campus-vpn/get-connected-campus-vpn<br /> <br /> -- Vraj<br /> // [[User:John_d|Demis D. John]] 20:08, 22 April 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162983 2025-04-21T21:34:46Z

<p>Mehalana v: /* EVG - Scheduled downtime */</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====Dicing Saw Is down=====<br /> I was unable to resolve the Z axis travel issue. Waiting to hear back from ADT.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 20:30, 17 April 2025 (UTC)<br /> <br /> ===== SignupMonkey + Wiki: Off-Campus Access=====<br /> Due to a DDoS attack affecting the Signupmonkey server, we have restricted access to the website, including both the Nanofab Wiki and Signupmonkey, except for users '''on campus using UCSB Wi-Fi or LAN'''. <br /> <br /> If you are off-campus, please utilize the UCSB VPN to access our sites. Here are the installation instructions for VPN on your device. You will need your UCSB NetID for download and installation - you would have received a UCSB NetID when you started using the NanoFab: <br /> <br /> https://it.ucsb.edu/ivanti-secure-access-campus-vpn/get-connected-campus-vpn<br /> <br /> This is hopefully a temporary solution, we will implement other remedies next week.<br /> <br /> -- Vraj<br /> // [[User:John_d|Demis D. John]] 03:41, 5 April 2025 (UTC)<br /> <br /> =====Unaxis Dep: DOWN=====<br /> The computer is not coming up, after the campus-wide power outage last week. Will continue to work on it next week.<br /> // [[User:John_d|Demis D. John]] 11:00, 4 April 2025 (UTC)<br /> <br /> =====Fluorine ICP: UP=====<br /> We finally got the slit valve assemble to seal correctly after making a number of mechanical adjustments. The tool is currently running an O2 clean and should be available to use within the next 10-15 minutes. Please let us know if you encounter any issues. The load lock seems like it's taking a while to get down to 0mT but that could just be a product of being open for the past several days.<br /> <br /> Thanks,<br /> <br /> Aidan<br /> // [[User:John_d|Demis D. John]] 06:39, 3 April 2025 (UTC)<br /> <br /> =====EVG is up=====<br /> I have reinstalled the generator and tested the tool without issue. Only time will tell if this latest round of repairs truly resolved the issue with this generator losing power intermittently.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 21:34, 21 April 2025 (UTC)<br /> <br /> =====Raith Velion UP=====<br /> Raith service have replaced the interferometer laser, and the system is pumping down overnight. I'll run calibrations and checks tomorrow and expect the Velion to be open for general use on Wednesday morning.<br /> --Dan<br /> //[[User:Mehalana v|Vraj Mehalana]] 22:27, 1 April 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162975 2025-04-17T20:30:07Z

<p>Mehalana v: /* SignupMonkey + Wiki: Off-Campus Access */</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====Dicing Saw Is down=====<br /> I was unable to resolve the Z axis travel issue. Waiting to hear back from ADT.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 20:30, 17 April 2025 (UTC)<br /> <br /> ===== SignupMonkey + Wiki: Off-Campus Access=====<br /> Due to a DDoS attack affecting the Signupmonkey server, we have restricted access to the website, including both the Nanofab Wiki and Signupmonkey, except for users '''on campus using UCSB Wi-Fi or LAN'''. <br /> <br /> If you are off-campus, please utilize the UCSB VPN to access our sites. Here are the installation instructions for VPN on your device. You will need your UCSB NetID for download and installation - you would have received a UCSB NetID when you started using the NanoFab: <br /> <br /> https://it.ucsb.edu/ivanti-secure-access-campus-vpn/get-connected-campus-vpn<br /> <br /> This is hopefully a temporary solution, we will implement other remedies next week.<br /> <br /> -- Vraj<br /> // [[User:John_d|Demis D. John]] 03:41, 5 April 2025 (UTC)<br /> <br /> =====Unaxis Dep: DOWN=====<br /> The computer is not coming up, after the campus-wide power outage last week. Will continue to work on it next week.<br /> // [[User:John_d|Demis D. John]] 11:00, 4 April 2025 (UTC)<br /> <br /> =====Fluorine ICP: UP=====<br /> We finally got the slit valve assemble to seal correctly after making a number of mechanical adjustments. The tool is currently running an O2 clean and should be available to use within the next 10-15 minutes. Please let us know if you encounter any issues. The load lock seems like it's taking a while to get down to 0mT but that could just be a product of being open for the past several days.<br /> <br /> Thanks,<br /> <br /> Aidan<br /> // [[User:John_d|Demis D. John]] 06:39, 3 April 2025 (UTC)<br /> <br /> =====EVG - Scheduled downtime=====<br /> I am looking at sending that generator on the week of March 24th or 31st. It should not take that long, but I would plan for it to be down for 3 weeks.<br /> <br /> Please let me know if this does not work for you or if you prefer one week over the other.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 17:50, 26 March 2025 (UTC)<br /> <br /> =====Raith Velion UP=====<br /> Raith service have replaced the interferometer laser, and the system is pumping down overnight. I'll run calibrations and checks tomorrow and expect the Velion to be open for general use on Wednesday morning.<br /> --Dan<br /> //[[User:Mehalana v|Vraj Mehalana]] 22:27, 1 April 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Vraj_Mehalana&diff=162952 2025-04-08T19:01:35Z

<p>Mehalana v: </p> <hr /> <div>{{staff|{{PAGENAME}}<br /> |position = Systems Administrator<br /> |room = 1109B<br /> |phone = (805) 839-4689 <br /> |email = vraj@ucsb.edu<br /> }}<br /> =Tools=<br /> {{PAGENAME}} is the supervisor for the following systems:<br /> <br /> {|<br /> |- valign=&quot;top&quot;<br /> |<br /> * Computer Networks<br /> * Web servers (including Nanofiles SFTP)<br /> * Web sites (SignupMonkey, nanotech.ucsb.edu, Nanofab Wiki)<br /> |}</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Luis_Zuzunaga&diff=162951 2025-04-08T18:11:39Z

<p>Mehalana v: </p> <hr /> <div>{{staff|{{PAGENAME}}<br /> |position = Research Assistant<br /> |room = 1109C<br /> |phone = (805)893-8258<br /> |cell = <br /> |email = luis@ece.ucsb.edu<br /> }}<br /> <br /> =About=<br /> . <br /> <br /> . <br /> <br /> =Current Work=<br /> .<br /> <br /> .<br /> <br /> =Tools=<br /> {{PAGENAME}} is in charge of the following tools:<br /> <br /> *[[Critical Point Dryer]]</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162936 2025-04-01T22:27:32Z

<p>Mehalana v: /* Raith Velion Down */</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====Fluorine ICP: DOWN=====<br /> Hello All,<br /> <br /> The shaft that actuates the isolation valve between the loadlock and the process chamber has broken. I have reached out to Plasmatherm to see if they happen to have a spare but the odds are exceedingly low. We will update you all as we know more, but it will be down through the weekend and into early next week.<br /> <br /> Tony<br /> // [[User:John_d|Demis D. John]] 15:25, 29 March 2025 (UTC)<br /> <br /> =====Lab Open=====<br /> Hello All,<br /> <br /> Following the campus-wide power shutoff, <br /> The fab is open but the following equipment still has lingering issues:<br /> <br /> # Unaxis ICP-PECVD - Main computer is not coming up<br /> # ALD/CAIBE - All chambers down. Bill is still working on it.<br /> # Fluorine Etcher - Will remain down until it can be addressed Monday.<br /> # EB3 - Cryo regen failed, on second regen so should come up later.<br /> # GCA Autostep - Having computer issues.<br /> # The ALD/CABE and EB3 have a more than fair chance of coming back up today. <br /> <br /> Bill will have those updates along with the status of the Autostep. <br /> <br /> The Unaxis and Fluorine etcher will not be coming up until sometime next week at the earliest.<br /> <br /> Best,<br /> Tony Bosch<br /> // [[User:John_d|Demis D. John]] 21:37, 28 March 2025 (UTC)<br /> <br /> =====RIE #5 is up=====<br /> We found a burnt wire in the system controller. System is ready to use.<br /> //[[User:Mehalana v|Vraj Mehalana]] 17:51, 26 March 2025 (UTC)<br /> <br /> =====EVG - Scheduled downtime=====<br /> I am looking at sending that generator on the week of the 24th or 31st. It should not take that long, but I would plan for it to be down for 3 weeks.<br /> <br /> Please let me know if this does not work for you or if you prefer one week over the other.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 17:50, 26 March 2025 (UTC)<br /> <br /> =====Raith Velion UP=====<br /> Raith service have replaced the interferometer laser, and the system is pumping down overnight. I'll run calibrations and checks tomorrow and expect the Velion to be open for general use on Wednesday morning.<br /> --Dan<br /> //[[User:Mehalana v|Vraj Mehalana]] 22:27, 1 April 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162930 2025-03-26T17:51:42Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> =====RIE #5 is up=====<br /> We found a burnt wire in the system controller. System is ready to use.<br /> //[[User:Mehalana v|Vraj Mehalana]] 17:51, 26 March 2025 (UTC)<br /> =====EVG - Scheduled downtime=====<br /> I am looking at sending that generator on the week of the 24th or 31st. It should not take that long, but I would plan for it to be down for 3 weeks.<br /> <br /> Please let me know if this does not work for you or if you prefer one week over the other.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 17:50, 26 March 2025 (UTC)<br /> =====Raith Velion Down=====<br /> There is a fault with the laser interferometer stage on the Raith Velion FIB. I have contacted Raith service for advice on how to proceed, I will send an update when I know more. The tool is down until further notice.<br /> //[[User:Mehalana v|Vraj Mehalana]] 17:49, 26 March 2025 (UTC)<br /> <br /> =====Lab Outage: March 27-28th=====<br /> Users,<br /> <br /> Southern California Edison will be shutting off the power to the entire campus on Thursday March 27th for maintenance. To support this, we will be '''shutting down the lab at 4pm on Thursday 3/27 and starting back up when power is restored sometime Friday 3/28 afternoon'''. This includes the Backend Lab.<br /> <br /> All projects/work must be stored away. No overnight processes will be allowed. Anything left out will be confiscated and/or disposed of.<br /> <br /> I will send out an update when the power has been restored, and the lab is ready for use.<br /> <br /> Thank you,<br /> Peder Lenvik<br /> // [[User:John_d|Demis D. John]] 19:04, 19 March 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162929 2025-03-26T17:50:30Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> =====EVG - Scheduled downtime=====<br /> I am looking at sending that generator on the week of the 24th or 31st. It should not take that long, but I would plan for it to be down for 3 weeks.<br /> <br /> Please let me know if this does not work for you or if you prefer one week over the other.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 17:50, 26 March 2025 (UTC)<br /> =====Raith Velion Down=====<br /> There is a fault with the laser interferometer stage on the Raith Velion FIB. I have contacted Raith service for advice on how to proceed, I will send an update when I know more. The tool is down until further notice.<br /> //[[User:Mehalana v|Vraj Mehalana]] 17:49, 26 March 2025 (UTC)<br /> <br /> =====Lab Outage: March 27-28th=====<br /> Users,<br /> <br /> Southern California Edison will be shutting off the power to the entire campus on Thursday March 27th for maintenance. To support this, we will be '''shutting down the lab at 4pm on Thursday 3/27 and starting back up when power is restored sometime Friday 3/28 afternoon'''. This includes the Backend Lab.<br /> <br /> All projects/work must be stored away. No overnight processes will be allowed. Anything left out will be confiscated and/or disposed of.<br /> <br /> I will send out an update when the power has been restored, and the lab is ready for use.<br /> <br /> Thank you,<br /> Peder Lenvik<br /> // [[User:John_d|Demis D. John]] 19:04, 19 March 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162928 2025-03-26T17:49:08Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> =====Raith Velion Down=====<br /> There is a fault with the laser interferometer stage on the Raith Velion FIB. I have contacted Raith service for advice on how to proceed, I will send an update when I know more. The tool is down until further notice.<br /> //[[User:Mehalana v|Vraj Mehalana]] 17:49, 26 March 2025 (UTC)<br /> <br /> =====Lab Outage: March 27-28th=====<br /> Users,<br /> <br /> Southern California Edison will be shutting off the power to the entire campus on Thursday March 27th for maintenance. To support this, we will be '''shutting down the lab at 4pm on Thursday 3/27 and starting back up when power is restored sometime Friday 3/28 afternoon'''. This includes the Backend Lab.<br /> <br /> All projects/work must be stored away. No overnight processes will be allowed. Anything left out will be confiscated and/or disposed of.<br /> <br /> I will send out an update when the power has been restored, and the lab is ready for use.<br /> <br /> Thank you,<br /> Peder Lenvik<br /> // [[User:John_d|Demis D. John]] 19:04, 19 March 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162918 2025-03-14T19:31:21Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> =====EBL Move-In: Tues 9-11a=====<br /> Users,<br /> <br /> Thank you for your patience while we moved the new EBL system in.<br /> <br /> The lab is fully open for use.<br /> <br /> Peder Lenvik<br /> <br /> Sr. Facilities Lead<br /> // [[User:John_d|Demis D. John]] 23:47, 10 March 2025 (UTC) <br /> <br /> =====MLA150 is UP=====<br /> System will be available at 12:30 today (Fri Mar 7th). No changes to OAF settings but PAF has moved about 10 points positive for focus. We will work on adjusting PAF back to around 0 (on our cal resist) some time next week.<br /> -Lee<br /> //[[User:John_d|Demis D. John]] 20:51, 7 March 2025 (UTC)<br /> <br /> =====Stepper #3 (ASML DUV) - Maint Complete =====<br /> ASML Maintenance is complete, the system is up.<br /> // [[User:John_d|Demis D. John]] 02:18, 7 March 2025 (UTC)<br /> <br /> =====RIE #5 Down: Mon March 13th =====<br /> The line project has completed and tested good.<br /> Tool is up for use.<br /> //19:31, 14 March 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162870 2025-03-04T18:59:22Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> =====MLA150 is down=====<br /> The FSE will be onsite tomorrow morning to begin working on the tool. I'll send out an email some time tomorrow once we have an idea of how long the repairs will take.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 18:59, 4 March 2025 (UTC)<br /> =====PECVD#2 will remain down overnight=====<br /> Unfortunately PECVD2 will remain down overnight.<br /> <br /> The heater is unable to keep up with the setpoint while running.<br /> <br /> Don and I replaced the heater controller without luck.<br /> <br /> I am cooling down the chamber overnight and we will look into the heater coil in the morning.<br /> //[[User:Mehalana v|Vraj Mehalana]] 03:31, 25 February 2025 (UTC)<br /> <br /> =====Olympus DSX Microscope: UP=====<br /> I have installed a new head and tested it with no problems. Please let me know if you have any questions.<br /> -- Tony Bosch<br /> // [[User:John_d|Demis D. John]] 04:57, 25 February 2025 (UTC)<br /> <br /> =====RIE #5 Down=====<br /> RIE #5 will be down Monday March 13th through the end of Wednesday March 15th for maintenance.<br /> <br /> If we complete the job early we will send a follow-up email releasing the system.<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 09:46, 21 February 2025 (UTC)<br /> <br /> =====Stepper #3 (ASML DUV) - Maint moved to March 3rd=====<br /> We have postponed the Periodic Maintenance (PM) to the week of Monday March 3rd.<br /> Please plan your work accordingly. <br /> // [[User:John_d|Demis D. John]] 19:44, 4 February 2025 (UTC)<br /> <br /> =====Oxford ALD+Ion Mill: UP=====<br /> The tool now runs all process temperatures (120-300c).<br /> --Bill Millerski<br /> UCSB<br /> //[[User:John_d|Demis D. John]] 19:48, 4 February 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162859 2025-02-25T03:31:56Z

<p>Mehalana v: /* ECVD#2 will remain down overnight */</p> <hr /> <div>&lt;startfeed /&gt;<br /> =====PECVD#2 will remain down overnight=====<br /> Unfortunately PECVD2 will remain down overnight.<br /> <br /> The heater is unable to keep up with the setpoint while running.<br /> <br /> Don and I replaced the heater controller without luck.<br /> <br /> I am cooling down the chamber overnight and we will look into the heater coil in the morning.<br /> //[[User:Mehalana v|Vraj Mehalana]] 03:31, 25 February 2025 (UTC)<br /> <br /> =====RIE #5 Down=====<br /> RIE #5 will be down Monday March 13th through the end of Wednesday March 15th for maintenance.<br /> <br /> If we complete the job early we will send a follow-up email releasing the system.<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 09:46, 21 February 2025 (UTC)<br /> <br /> =====Olympus DSX Microscope: Down=====<br /> After speaking with Olympus it looks like there is a problem with the polarizer that is interfering with basic system initialization. I'm waiting for the repair quote and will update everyone when we know more.<br /> -- Tony Bosch<br /> // [[User:John_d|Demis D. John]] 20:41, 5 February 2025 (UTC)<br /> <br /> =====Stepper #3 (ASML DUV) - Maint moved to March 3rd=====<br /> We have postponed the Periodic Maintenance (PM) to the week of Monday March 3rd.<br /> Please plan your work accordingly. <br /> // [[User:John_d|Demis D. John]] 19:44, 4 February 2025 (UTC)<br /> <br /> =====Oxford ALD+Ion Mill: UP=====<br /> The tool now runs all process temperatures (120-300c).<br /> --Bill Millerski<br /> UCSB<br /> //[[User:John_d|Demis D. John]] 19:48, 4 February 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162858 2025-02-25T03:31:49Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> =====ECVD#2 will remain down overnight=====<br /> Unfortunately PECVD2 will remain down overnight.<br /> <br /> The heater is unable to keep up with the setpoint while running.<br /> <br /> Don and I replaced the heater controller without luck.<br /> <br /> I am cooling down the chamber overnight and we will look into the heater coil in the morning.<br /> //[[User:Mehalana v|Vraj Mehalana]] 03:31, 25 February 2025 (UTC)<br /> =====RIE #5 Down=====<br /> RIE #5 will be down Monday March 13th through the end of Wednesday March 15th for maintenance.<br /> <br /> If we complete the job early we will send a follow-up email releasing the system.<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 09:46, 21 February 2025 (UTC)<br /> <br /> =====Olympus DSX Microscope: Down=====<br /> After speaking with Olympus it looks like there is a problem with the polarizer that is interfering with basic system initialization. I'm waiting for the repair quote and will update everyone when we know more.<br /> -- Tony Bosch<br /> // [[User:John_d|Demis D. John]] 20:41, 5 February 2025 (UTC)<br /> <br /> =====Stepper #3 (ASML DUV) - Maint moved to March 3rd=====<br /> We have postponed the Periodic Maintenance (PM) to the week of Monday March 3rd.<br /> Please plan your work accordingly. <br /> // [[User:John_d|Demis D. John]] 19:44, 4 February 2025 (UTC)<br /> <br /> =====Oxford ALD+Ion Mill: UP=====<br /> The tool now runs all process temperatures (120-300c).<br /> --Bill Millerski<br /> UCSB<br /> //[[User:John_d|Demis D. John]] 19:48, 4 February 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162851 2025-02-21T22:01:54Z

<p>Mehalana v: /* Oxford ALD+Ion Mill: UP */</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====RIE #5 Down=====<br /> RIE #5 will be down Monday March 13th through the end of Wednesday March 15th for maintenance.<br /> <br /> If we complete the job early we will send a follow-up email releasing the system.<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 09:46, 21 February 2025 (UTC)<br /> <br /> =====Olympus DSX Microscope: Down=====<br /> After speaking with Olympus it looks like there is a problem with the polarizer that is interfering with basic system initialization. I'm waiting for the repair quote and will update everyone when we know more.<br /> -- Tony Bosch<br /> // [[User:John_d|Demis D. John]] 20:41, 5 February 2025 (UTC)<br /> <br /> =====Stepper #3 (ASML DUV) - Maint moved to March 3rd=====<br /> We have postponed the Periodic Maintenance (PM) to the week of Monday March 3rd.<br /> Please plan your work accordingly. <br /> // [[User:John_d|Demis D. John]] 19:44, 4 February 2025 (UTC)<br /> <br /> =====Oxford ALD+Ion Mill: UP=====<br /> The tool now runs all process temperatures (120-300c).<br /> --Bill Millerski<br /> UCSB<br /> //[[User:John_d|Demis D. John]] 19:48, 4 February 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162845 2025-02-21T09:46:52Z

<p>Mehalana v: /* RIE #5 Down */</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====RIE #5 Down=====<br /> RIE #5 will be down Monday March 13th through the end of Wednesday March 15th for maintenance.<br /> <br /> If we complete the job early we will send a follow-up email releasing the system.<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 09:46, 21 February 2025 (UTC)<br /> <br /> =====Olympus DSX Microscope: Down=====<br /> After speaking with Olympus it looks like there is a problem with the polarizer that is interfering with basic system initialization. I'm waiting for the repair quote and will update everyone when we know more.<br /> -- Tony Bosch<br /> // [[User:John_d|Demis D. John]] 20:41, 5 February 2025 (UTC)<br /> <br /> =====Stepper #3 (ASML DUV) - Maint moved to March 3rd=====<br /> We have postponed the Periodic Maintenance (PM) to the week of Monday March 3rd.<br /> Please plan your work accordingly. <br /> // [[User:John_d|Demis D. John]] 19:44, 4 February 2025 (UTC)<br /> <br /> =====Oxford ALD+Ion Mill: UP=====<br /> The tool is useable and in its original condition. If you had a reservation under the previous tool designation it has already been moved over for you.<br /> <br /> Chamber 1 is operational and available for use. However, only recipes that run at 300C are to be ran on the tool, as the current thermocouple is only calibrated for that temperature at this time.<br /> <br /> Please use the original tool name on SUM to make all future tool reservations.<br /> <br /> There is no longer a need for supplemental training. If you have been previously trained on the tool but not received the supplemental training, you can once again reserve and use the tool.<br /> <br /> Please feel free to email me directly with any questions you may have.<br /> <br /> Thanks<br /> Bill Millerski<br /> UCSB<br /> //[[User:John_d|Demis D. John]] 19:48, 4 February 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162844 2025-02-21T09:46:43Z

<p>Mehalana v: /* Olympus DSX Microscope: Down */</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====RIE #5 Down=====<br /> RIE #5 will be down Monday March 13th through the end of Wednesday March 15th for maintenance.<br /> <br /> If we complete the job early we will send a follow-up email releasing the system.<br /> <br /> //09:46, 21 February 2025 (UTC)<br /> =====Olympus DSX Microscope: Down=====<br /> After speaking with Olympus it looks like there is a problem with the polarizer that is interfering with basic system initialization. I'm waiting for the repair quote and will update everyone when we know more.<br /> -- Tony Bosch<br /> // [[User:John_d|Demis D. John]] 20:41, 5 February 2025 (UTC)<br /> <br /> =====Stepper #3 (ASML DUV) - Maint moved to March 3rd=====<br /> We have postponed the Periodic Maintenance (PM) to the week of Monday March 3rd.<br /> Please plan your work accordingly. <br /> // [[User:John_d|Demis D. John]] 19:44, 4 February 2025 (UTC)<br /> <br /> =====Oxford ALD+Ion Mill: UP=====<br /> The tool is useable and in its original condition. If you had a reservation under the previous tool designation it has already been moved over for you.<br /> <br /> Chamber 1 is operational and available for use. However, only recipes that run at 300C are to be ran on the tool, as the current thermocouple is only calibrated for that temperature at this time.<br /> <br /> Please use the original tool name on SUM to make all future tool reservations.<br /> <br /> There is no longer a need for supplemental training. If you have been previously trained on the tool but not received the supplemental training, you can once again reserve and use the tool.<br /> <br /> Please feel free to email me directly with any questions you may have.<br /> <br /> Thanks<br /> Bill Millerski<br /> UCSB<br /> //[[User:John_d|Demis D. John]] 19:48, 4 February 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162802 2025-02-07T20:10:23Z

<p>Mehalana v: /* ASML Quarterly Maintenance: Mon Feb 10th */</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====Olympus DSX Microscope: Down=====<br /> After speaking with Olympus it looks like there is a problem with the polarizer that is interfering with basic system initialization. I'm waiting for the repair quote and will update everyone when we know more.<br /> -- Tony Bosch<br /> // [[User:John_d|Demis D. John]] 20:41, 5 February 2025 (UTC)<br /> <br /> =====Stepper #3 (ASML DUV) - Maint moved to March 3rd=====<br /> We have postponed the Periodic Maintenance (PM) to the week of Monday March 3rd.<br /> Please plan your work accordingly. <br /> // [[User:John_d|Demis D. John]] 19:44, 4 February 2025 (UTC)<br /> <br /> =====ICP #2 Maint: Complete=====<br /> <br /> The maintenance is completed and the tool is finishing up an O2 clean run. We are still seeing a 0.04-0.05 Pa actual pressure difference in the software (as before the maint work) which we will address tomorrow, as the tool needs time to reach base pressure. -- Lee Sawyer<br /> <br /> //[[User:John_d|Demis D. John]] 02:01, 5 February 2025 (UTC)<br /> <br /> =====Oxford ALD+Ion Mill: UP=====<br /> The tool is useable and in its original condition. If you had a reservation under the previous tool designation it has already been moved over for you.<br /> <br /> Chamber 1 is operational and available for use. However, only recipes that run at 300C are to be ran on the tool, as the current thermocouple is only calibrated for that temperature at this time.<br /> <br /> Please use the original tool name on SUM to make all future tool reservations.<br /> <br /> There is no longer a need for supplemental training. If you have been previously trained on the tool but not received the supplemental training, you can once again reserve and use the tool.<br /> <br /> Please feel free to email me directly with any questions you may have.<br /> <br /> Thanks<br /> Bill Millerski<br /> UCSB<br /> //[[User:John_d|Demis D. John]] 19:48, 4 February 2025 (UTC)<br /> <br /> =====New Gowns: Toolbelts purchases=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase. <br /> <br /> Two vendors for cleanroom belts we are using are listed here, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162778 2025-01-31T18:54:07Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====ICP #2 Scheduled Maint next Tuesday 2/4=====<br /> <br /> ICP#2 will be unavailable a good chunk of the day this coming Tuesday. We will be cleaning the chamber and servicing the throttle valve as we believe it may be the source of the reaction chamber pressure errors (plus it is due for servicing).<br /> <br /> -Lee<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 18:54, 31 January 2025 (UTC)<br /> =====YES - Scheduled Maint=====<br /> <br /> I will be taking the YES down for a PM on Tuesday beginning at 8 am. Since I will be changing out the throttle valve and swapping in our original generator, this could go into Wednesday. Please plan your processing accordingly.<br /> <br /> -Lee<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 17:22, 23 January 2025 (UTC)<br /> <br /> =====Lab is Open=====<br /> <br /> All suits have been pulled and new suits have been put up. All personal items left behind can be found in the boxes in the lobby.<br /> <br /> Please sign up for your hanger spot.<br /> <br /> THE LAB IS NOW OPEN FOR BUSINESS<br /> <br /> Thank you for your patience during shutdown activities.<br /> -- [[Peder Lenvik]]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====New Gowns in Jan=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for tool belts you can use. <br /> <br /> Two vendors for cleanroom belts we are using, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====KLA P7 Profilometer: Down=====<br /> The KLA remains down awaiting parts. This part order has been expedited to the extent possible and should be here in the next few days.<br /> <br /> Thanks<br /> Bill Millerski<br /> // [[User:John_d|Demis D. John]] 03:30, 3 January 2025 (UTC)<br /> <br /> =====Oxford ALD+Ion Mill=====<br /> Unfortunately Chamber 1 is still down for our Oxford Cluster tool. However we did manage a &quot;work around&quot; to get Chamber 2 and Chamber 3 operational again. The software is in constant error state which does not affect processing on Chamber 2 and Chamber 3. <br /> <br /> A new tool listing is available in sign up monkey for both these chambers with the word &quot;temporary&quot; or &quot;temp&quot;. For the time being users will have to use these &quot;new&quot; tool listings to reserve time on Chamber 2 and Chamber 3. Users will have to go through a quick tutorial with me prior to having access to the tool in order to reserve time slots on sign up monkey. Under NO circumstances are users to use this tool prior to being signed off after being shown how to navigate the software under the current error state.<br /> <br /> Just to reiterate: <br /> 1) The tool remains locked out in sign up monkey for the previous tool names<br /> <br /> 2) There is a new tool designation for Chamber 2 &amp; 3 in sign up monkey&quot;Deposition, ALD, Chamber 3 (Oxford FlexAl) Temporary&quot;&quot;Dry Etch, Ion Mill (Oxford Flexal) Temp&quot;<br /> <br /> 3) Users need a quick tutorial from me prior to getting tool access.<br /> <br /> 4) Users are not to run the tool until being signed off on the new procedure by staff! Any user caught using the tool without having the updated tool tutorial sign off, will be subject to suspension.<br /> <br /> 5) I will be available at any time during my regular scheduled shift to sign users off. I will be at the tool in the lab for the majority of my work day.<br /> -- Bill Millerski<br /> //[[User:Mehalana v|Vraj Mehalana]] 23:40, 8 January 2025 (UTC)<br /> <br /> =====Holography/PL: HeCd Laser Down Mon Dec 16th=====<br /> The 325nm UV Laser will be unavailable from Mon. Dec 16th, through the christmas shutdown, and will be available again soon after Monday Jan 6th. <br /> We will be installing the refurbished laser which will have higher output power.<br /> <br /> Holography will be unavailable during this time, but all other PL lasers will be available.<br /> // [[User:John_d|Demis D. John]] 03:28, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162756 2025-01-23T17:22:05Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====YES - Scheduled Maint=====<br /> <br /> I will be taking the YES down for a PM on Tuesday beginning at 8 am. Since I will be changing out the throttle valve and swapping in our original generator, this could go into Wednesday. Please plan your processing accordingly.<br /> <br /> -Lee<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 17:22, 23 January 2025 (UTC)<br /> <br /> =====Lab is Open=====<br /> <br /> All suits have been pulled and new suits have been put up. All personal items left behind can be found in the boxes in the lobby.<br /> <br /> Please sign up for your hanger spot.<br /> <br /> THE LAB IS NOW OPEN FOR BUSINESS<br /> <br /> Thank you for your patience during shutdown activities.<br /> -- [[Peder Lenvik]]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====New Gowns in Jan=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for tool belts you can use. <br /> <br /> Two vendors for cleanroom belts we are using, you may request others:<br /> * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist. <br /> * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&amp;searchTerm=cleanroom-fannypack-1-ea-white&amp;searchType=Rapid&amp;matchedCatNo=NC0723118 HiTEC Fannypack]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====KLA P7 Profilometer: Down=====<br /> The KLA remains down awaiting parts. This part order has been expedited to the extent possible and should be here in the next few days.<br /> <br /> Thanks<br /> Bill Millerski<br /> // [[User:John_d|Demis D. John]] 03:30, 3 January 2025 (UTC)<br /> <br /> =====Oxford ALD+Ion Mill=====<br /> Unfortunately Chamber 1 is still down for our Oxford Cluster tool. However we did manage a &quot;work around&quot; to get Chamber 2 and Chamber 3 operational again. The software is in constant error state which does not affect processing on Chamber 2 and Chamber 3. <br /> <br /> A new tool listing is available in sign up monkey for both these chambers with the word &quot;temporary&quot; or &quot;temp&quot;. For the time being users will have to use these &quot;new&quot; tool listings to reserve time on Chamber 2 and Chamber 3. Users will have to go through a quick tutorial with me prior to having access to the tool in order to reserve time slots on sign up monkey. Under NO circumstances are users to use this tool prior to being signed off after being shown how to navigate the software under the current error state.<br /> <br /> Just to reiterate: <br /> 1) The tool remains locked out in sign up monkey for the previous tool names<br /> <br /> 2) There is a new tool designation for Chamber 2 &amp; 3 in sign up monkey&quot;Deposition, ALD, Chamber 3 (Oxford FlexAl) Temporary&quot;&quot;Dry Etch, Ion Mill (Oxford Flexal) Temp&quot;<br /> <br /> 3) Users need a quick tutorial from me prior to getting tool access.<br /> <br /> 4) Users are not to run the tool until being signed off on the new procedure by staff! Any user caught using the tool without having the updated tool tutorial sign off, will be subject to suspension.<br /> <br /> 5) I will be available at any time during my regular scheduled shift to sign users off. I will be at the tool in the lab for the majority of my work day.<br /> -- Bill Millerski<br /> //[[User:Mehalana v|Vraj Mehalana]] 23:40, 8 January 2025 (UTC)<br /> <br /> =====Holography/PL: HeCd Laser Down Mon Dec 16th=====<br /> The 325nm UV Laser will be unavailable from Mon. Dec 16th, through the christmas shutdown, and will be available again soon after Monday Jan 6th. <br /> We will be installing the refurbished laser which will have higher output power.<br /> <br /> Holography will be unavailable during this time, but all other PL lasers will be available.<br /> // [[User:John_d|Demis D. John]] 03:28, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162743 2025-01-08T23:40:10Z

<p>Mehalana v: /* Oxford ALD+Ion Mill */</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====Lab is Open=====<br /> <br /> All suits have been pulled and clean sheets have been put up. All personal items left behind can be found in the boxes in the lobby.<br /> <br /> Please sign up for your hanger spot.<br /> <br /> THE LAB IS NOW OPEN FOR BUSINESS<br /> <br /> Thank you for your patience during shutdown activities.<br /> -- [[Peder Lenvik]]<br /> <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====New Gowns in Jan=====<br /> We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for tool belts you can use. <br /> // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)<br /> <br /> =====KLA P7 Profilometer: Down=====<br /> The KLA remains down awaiting parts. This part order has been expedited to the extent possible and should be here in the next few days.<br /> <br /> Thanks<br /> Bill Millerski<br /> // [[User:John_d|Demis D. John]] 03:30, 3 January 2025 (UTC)<br /> <br /> =====Oxford ALD+Ion Mill=====<br /> Unfortunately Chamber 1 is still down for our Oxford Cluster tool. However we did manage a &quot;work around&quot; to get Chamber 2 and Chamber 3 operational again. The software is in constant error state which does not affect processing on Chamber 2 and Chamber 3. <br /> <br /> A new tool listing is available in sign up monkey for both these chambers with the word &quot;temporary&quot; or &quot;temp&quot;. For the time being users will have to use these &quot;new&quot; tool listings to reserve time on Chamber 2 and Chamber 3. Users will have to go through a quick tutorial with me prior to having access to the tool in order to reserve time slots on sign up monkey. Under NO circumstances are users to use this tool prior to being signed off after being shown how to navigate the software under the current error state.<br /> <br /> Just to reiterate: <br /> 1) The tool remains locked out in sign up monkey for the previous tool names<br /> <br /> 2) There is a new tool designation for Chamber 2 &amp; 3 in sign up monkey&quot;Deposition, ALD, Chamber 3 (Oxford FlexAl) Temporary&quot;&quot;Dry Etch, Ion Mill (Oxford Flexal) Temp&quot;<br /> <br /> 3) Users need a quick tutorial from me prior to getting tool access.<br /> <br /> 4) Users are not to run the tool until being signed off on the new procedure by staff! Any user caught using the tool without having the updated tool tutorial sign off, will be subject to suspension.<br /> <br /> 5) I will be available at any time during my regular scheduled shift to sign users off. I will be at the tool in the lab for the majority of my work day.<br /> -- Bill Millerski<br /> //[[User:Mehalana v|Vraj Mehalana]] 23:40, 8 January 2025 (UTC)<br /> <br /> =====Holography/PL: HeCd Laser Down Mon Dec 16th=====<br /> The 325nm UV Laser will be unavailable from Mon. Dec 16th, through the christmas shutdown, and will be available again soon after Monday Jan 6th. <br /> We will be installing the refurbished laser which will have higher output power.<br /> <br /> Holography will be unavailable during this time, but all other PL lasers will be available.<br /> // [[User:John_d|Demis D. John]] 03:28, 3 January 2025 (UTC)<br /> <br /> =====Suss SB6-8E=====<br /> We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests. <br /> <br /> I will send out an update once we have one.<br /> -Aidan<br /> // [[User:John_d|Demis D. John]] 00:35, 8 December 2024 (UTC)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162491 2024-10-17T16:48:15Z

<p>Mehalana v: /* E- Beam #2 Maint Work Next Week */</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> ===== EVG is down - Update=====<br /> I checked in with our vendor today as it has been 2 weeks since they got started on our RF generator. They are waiting on a part for it that should be arriving on Monday. If all goes well we should have the unit back late next week. I'll check with the vendor again on Wednesday and send out another update.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 16:48, 17 October 2024 (UTC)<br /> <br /> ===== E- Beam #2 Maint Work Next Week=====<br /> E-Beam #2 will be down next Wednesday (10/16) and possibly into Thursday to replace the hoist sensors. This will also reduce the likelihood of future issues with the hoist which we dealt with recently. I will send an email out once the work is completed.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 13:23, 10 October 2024 (PDT)<br /> <br /> =====Stepper #3 (ASML DUV) - Tool UP=====<br /> We finished calibrations, tool is up and ready for use.<br /> No limit on number of wafers.<br /> <br /> Input has been set back to port # 1 (right) cassette, outputting to Left cassette (Port #2). // [[User:John_d|Demis D. John]] 17:36, 9 October 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162490 2024-10-17T16:47:09Z

<p>Mehalana v: Reverted edits by Mehalana v (talk) to last revision by John d</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> ===== E- Beam #2 Maint Work Next Week=====<br /> E-Beam #2 will be down next Wednesday (10/16) and possibly into Thursday to replace the hoist sensors. This will also reduce the likelihood of future issues with the hoist which we dealt with recently. I will send an email out once the work is completed.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 13:23, 10 October 2024 (PDT)<br /> <br /> =====Stepper #3 (ASML DUV) - Tool UP=====<br /> We finished calibrations, tool is up and ready for use.<br /> No limit on number of wafers.<br /> <br /> Input has been set back to port # 1 (right) cassette, outputting to Left cassette (Port #2). // [[User:John_d|Demis D. John]] 17:36, 9 October 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162489 2024-10-17T16:46:46Z

<p>Mehalana v: /* E- Beam #2 Maint Work Next Week */</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> ===== E- Beam #2 Maint Work Next Week=====<br /> I checked in with our vendor today as it has been 2 weeks since they got started on our RF generator. They are waiting on a part for it that should be arriving on Monday. If all goes well we should have the unit back late next week. I'll check with the vendor again on Wednesday and send out another update.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 16:46, 17 October 2024 (UTC)<br /> <br /> =====Stepper #3 (ASML DUV) - Tool UP=====<br /> We finished calibrations, tool is up and ready for use.<br /> No limit on number of wafers.<br /> <br /> Input has been set back to port # 1 (right) cassette, outputting to Left cassette (Port #2). // [[User:John_d|Demis D. John]] 17:36, 9 October 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162485 2024-10-10T20:23:17Z

<p>Mehalana v: /* Stepper #3 (ASML DUV) - Tool UP */</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> ===== E- Beam #2 Maint Work Next Week=====<br /> E-Beam #2 will be down next Wednesday (10/16) and possibly into Thursday to replace the hoist sensors to something more modern. This will also reduce the likely hood of future issues with the hoist which we dealt with recently. I will send an email out once the work is completed.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 13:23, 10 October 2024 (PDT)<br /> <br /> =====Stepper #3 (ASML DUV) - Tool UP=====<br /> We finished calibrations, tool is up and ready for use.<br /> No limit on number of wafers.<br /> <br /> Input has been set back to port # 1 (right) cassette, outputting to Left cassette (Port #2). // [[User:John_d|Demis D. John]] 17:36, 9 October 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162457 2024-10-04T01:36:06Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====Stepper #3 (ASML DUV) - Tool down=====<br /> Wafer stage positioning laser is dying, Asml engineers will be on site Monday and Tuesday to repair. We have the replacement already on hand.<br /> <br /> Unfortunately, we cannot initialize the stage at this time. System is down. // [[User:Mehalana v|Vraj Mehalana]] 18:36, 3 October 2024 (PDT)<br /> <br /> =====MLA Service Complete=====<br /> The FSE has completed their work.<br /> <br /> I ran beam offset checks on both lasers prior to the maintenance and found that the Y axis value for the 405 laser was off by ~0.6 µm. I made the necessary change and ran another check with all values in spec. I also ran beam offset checks on both laser post maintenance along with an overlay exposure and all looked good.<br /> <br /> Tool is available to use.<br /> <br /> -Lee // [[User:John_d|Demis D. John]] 17:46, 2 October 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162430 2024-09-27T19:20:35Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> =====MLA Service this Tuesday=====<br /> HIMT will be onsite around 9am this Tuesday to address a minor issue with the tool. I have the blocked out until 5 pm but we do not anticipate it taking that long, hopefully about 4-5 hours. I'll send out an email once the tool is available.<br /> <br /> -Lee<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:20, 27 September 2024 (PDT)<br /> <br /> =====DSE is UP=====<br /> I’ve completed the installation of the new spool and lamps and the tool is free to use. We’ve run a number of different etches and upon initial inspection everything looks normal. However, it’s recommended you start with a test etch in case there is a slight shift in process.<br /> <br /> Thanks, Aidan <br /> // [[User:John_d|Demis D. John]] 12:36, 20 September 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====YES is available=====<br /> The error has been cleared and I ran a shorter 5 minute recipe with no warning/error. <br /> <br /> This seems to be exclusive to the longer (8+ minute recipes), which are throwing warnings for every wafer run this long. It also appears that running 3 wafers on a longer recipe will result in an error and aborted run on the 3rd wafer. We are just going to have to live with this until we have our other generator back. So until then, please limit the longer runs to 2 wafers max. If you have more than 2 wafers to run on a longer recipe then wait about 5-10 minutes in between batches.<br /> <br /> // [[User:Mehalana v|Vraj Mehalana]] 14:16, 18 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162384 2024-09-26T21:54:42Z

<p>Mehalana v: /* Focused Ion Beam (Raith Velion) - TOOL DOWN for Raith Service */</p> <hr /> <div>&lt;startfeed /&gt;<br /> =====DSE is UP=====<br /> I’ve completed the installation of the new spool and lamps and the tool is free to use. We’ve run a number of different etches and upon initial inspection everything looks normal. However, it’s recommended you start with a test etch in case there is a slight shift in process.<br /> <br /> Thanks, Aidan <br /> // [[User:John_d|Demis D. John]] 12:36, 20 September 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====YES is available=====<br /> The error has been cleared and I ran a shorter 5 minute recipe with no warning/error. <br /> <br /> This seems to be exclusive to the longer (8+ minute recipes), which are throwing warnings for every wafer run this long. It also appears that running 3 wafers on a longer recipe will result in an error and aborted run on the 3rd wafer. We are just going to have to live with this until we have our other generator back. So until then, please limit the longer runs to 2 wafers max. If you have more than 2 wafers to run on a longer recipe then wait about 5-10 minutes in between batches.<br /> <br /> // [[User:Mehalana v|Vraj Mehalana]] 14:16, 18 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162366 2024-09-18T21:16:10Z

<p>Mehalana v: /* YES EcoClean UP */</p> <hr /> <div>&lt;startfeed /&gt;<br /> =====DSE is Down=====<br /> After installing our backup spool the system ran for approximately 15 minutes and then failed again due to a leak in the chamber. I took apart the chamber and found a crack on the backup spool. <br /> <br /> I spoke to an engineer at PlasmaTherm and he told me this issue was indicative of a failing lamp (or lamps) that was causing a large delta of heat across the ceramic spool. <br /> <br /> I requested to have a couple new spools to be overnighted but they most likely won’t ship out until Monday. I tested the lamps and found two that were pretty heavily oxidized on the leads.<br /> <br /> I’ll install all new lamps and the new spool when it gets in next week.<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 13:02, 16 September 2024 (PDT)<br /> <br /> =====IBD is UP=====<br /> Replaced bad PLC controller on Depo beam. I then tested the beam with a 15 min gridclean recipe without issue.<br /> I then ran an SiO2 dep, and a 1 hour gridclean without issue.<br /> <br /> System UP - Mike Barreraz<br /> // [[User:John_d|Demis D. John]] 14:18, 12 September 2024 (PDT)<br /> <br /> =====Focused Ion Beam (Raith Velion) - TOOL DOWN for Raith Service=====<br /> Raith service need to work on the Velion a little longer than anticipated. I'll keep the tool down until 2pm tomorrow (Tuesday). I'll send further updates if anything changes.<br /> <br /> -Dan<br /> //[[User:Mehalana v|Vraj Mehalana]] 10:58, 12 September 2024 (PDT)<br /> <br /> =====Lab Closure Monday the 16th=====<br /> Fire Drill completed. Lab open. <br /> // [[User:Mehalana v|Vraj Mehalana]] 10:57, 12 September 2024 (PDT)<br /> <br /> =====MLA150: UP=====<br /> Optical AF has been calibrated and Defocus + Dose values are the same as before. PneuAF has not been checked et, but we expect a shift in PneuAF Defocus due to the Pneumatic nozzle replacement.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Stepper #3 (ASML DUV) - Down, update=====<br /> The alignment laser has now fully failed (no laser output at all), so we can't perform any exposures.<br /> ASML engineers will be on site Monday Tues (Sept 16th) to perform the repair.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====EBeam#2: Up=====<br /> Bell jar mount is in place. Hoist has been tested several times. System is ready to use.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====YES is available=====<br /> The error has been cleared and I ran a shorter 5 minute recipe with no warning/error. <br /> <br /> This seems to be exclusive to the longer (8+ minute recipes), which are throwing warnings for every wafer run this long. It also appears that running 3 wafers on a longer recipe will result in an error and aborted run on the 3rd wafer. We are just going to have to live with this until we have our other generator back. So until then, please limit the longer runs to 2 wafers max. If you have more than 2 wafers to run on a longer recipe then wait about 5-10 minutes in between batches.<br /> <br /> // [[User:Mehalana v|Vraj Mehalana]] 14:16, 18 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162361 2024-09-16T20:02:43Z

<p>Mehalana v: /* DSE is Down */</p> <hr /> <div>&lt;startfeed /&gt;<br /> =====DSE is Down=====<br /> After installing our backup spool the system ran for approximately 15 minutes and then failed again due to a leak in the chamber. I took apart the chamber and found a crack on the backup spool. <br /> <br /> I spoke to an engineer at PlasmaTherm and he told me this issue was indicative of a failing lamp (or lamps) that was causing a large delta of heat across the ceramic spool. <br /> <br /> I requested to have a couple new spools to be overnighted but they most likely won’t ship out until Monday. I tested the lamps and found two that were pretty heavily oxidized on the leads.<br /> <br /> I’ll install all new lamps and the new spool when it gets in next week.<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 13:02, 16 September 2024 (PDT)<br /> <br /> =====IBD is UP=====<br /> Replaced bad PLC controller on Depo beam. I then tested the beam with a 15 min gridclean recipe without issue.<br /> I then ran an SiO2 dep, and a 1 hour gridclean without issue.<br /> <br /> System UP - Mike Barreraz<br /> // [[User:John_d|Demis D. John]] 14:18, 12 September 2024 (PDT)<br /> <br /> =====Focused Ion Beam (Raith Velion) - TOOL DOWN for Raith Service=====<br /> Raith service need to work on the Velion a little longer than anticipated. I'll keep the tool down until 2pm tomorrow (Tuesday). I'll send further updates if anything changes.<br /> <br /> -Dan<br /> //[[User:Mehalana v|Vraj Mehalana]] 10:58, 12 September 2024 (PDT)<br /> <br /> =====Lab Closure Monday the 16th=====<br /> Fire Drill completed. Lab open. <br /> // [[User:Mehalana v|Vraj Mehalana]] 10:57, 12 September 2024 (PDT)<br /> <br /> =====MLA150: UP=====<br /> Optical AF has been calibrated and Defocus + Dose values are the same as before. PneuAF has not been checked et, but we expect a shift in PneuAF Defocus due to the Pneumatic nozzle replacement.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Stepper #3 (ASML DUV) - Down, update=====<br /> The alignment laser has now fully failed (no laser output at all), so we can't perform any exposures.<br /> ASML engineers will be on site Monday Tues (Sept 16th) to perform the repair.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====EBeam#2: Up=====<br /> Bell jar mount is in place. Hoist has been tested several times. System is ready to use.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====YES EcoClean UP=====<br /> The YES has been giving downstream temp warnings for the RF generator. These happen on the 3000W recipes that run for more than 4-5 minutes, and are just warnings (yellow banner/light), and can just be acknowledged without notifying Staff. Our other generator is out for repair, so this will be the norm until we get it back. Please let us know if you do get an error for this; red banner/light.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162360 2024-09-16T20:02:36Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> =====DSE is Down=====<br /> After installing our backup spool the system ran for approximately 15 minutes and then failed again due to a leak in the chamber. I took apart the chamber and found a crack on the backup spool. <br /> <br /> I spoke to an engineer at PlasmaTherm and he told me this issue was indicative of a failing lamp (or lamps) that was causing a large delta of heat across the ceramic spool. <br /> <br /> I requested to have a couple new spools to be overnighted but they most likely won’t ship out until Monday. I tested the lamps and found two that were pretty heavily oxidized on the leads.<br /> <br /> I’ll install all new lamps and the new spool when it gets in next week.<br /> <br /> //13:02, 16 September 2024 (PDT)<br /> <br /> =====IBD is UP=====<br /> Replaced bad PLC controller on Depo beam. I then tested the beam with a 15 min gridclean recipe without issue.<br /> I then ran an SiO2 dep, and a 1 hour gridclean without issue.<br /> <br /> System UP - Mike Barreraz<br /> // [[User:John_d|Demis D. John]] 14:18, 12 September 2024 (PDT)<br /> <br /> =====Focused Ion Beam (Raith Velion) - TOOL DOWN for Raith Service=====<br /> Raith service need to work on the Velion a little longer than anticipated. I'll keep the tool down until 2pm tomorrow (Tuesday). I'll send further updates if anything changes.<br /> <br /> -Dan<br /> //[[User:Mehalana v|Vraj Mehalana]] 10:58, 12 September 2024 (PDT)<br /> <br /> =====Lab Closure Monday the 16th=====<br /> Fire Drill completed. Lab open. <br /> // [[User:Mehalana v|Vraj Mehalana]] 10:57, 12 September 2024 (PDT)<br /> <br /> =====MLA150: UP=====<br /> Optical AF has been calibrated and Defocus + Dose values are the same as before. PneuAF has not been checked et, but we expect a shift in PneuAF Defocus due to the Pneumatic nozzle replacement.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Stepper #3 (ASML DUV) - Down, update=====<br /> The alignment laser has now fully failed (no laser output at all), so we can't perform any exposures.<br /> ASML engineers will be on site Monday Tues (Sept 16th) to perform the repair.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====EBeam#2: Up=====<br /> Bell jar mount is in place. Hoist has been tested several times. System is ready to use.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====YES EcoClean UP=====<br /> The YES has been giving downstream temp warnings for the RF generator. These happen on the 3000W recipes that run for more than 4-5 minutes, and are just warnings (yellow banner/light), and can just be acknowledged without notifying Staff. Our other generator is out for repair, so this will be the norm until we get it back. Please let us know if you do get an error for this; red banner/light.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162359 2024-09-16T20:01:25Z

<p>Mehalana v: /* Lab Closure Monday the 16th */</p> <hr /> <div>&lt;startfeed /&gt;<br /> =====IBD is UP=====<br /> Replaced bad PLC controller on Depo beam. I then tested the beam with a 15 min gridclean recipe without issue.<br /> I then ran an SiO2 dep, and a 1 hour gridclean without issue.<br /> <br /> System UP - Mike Barreraz<br /> // [[User:John_d|Demis D. John]] 14:18, 12 September 2024 (PDT)<br /> <br /> =====Focused Ion Beam (Raith Velion) - TOOL DOWN for Raith Service=====<br /> Raith service need to work on the Velion a little longer than anticipated. I'll keep the tool down until 2pm tomorrow (Tuesday). I'll send further updates if anything changes.<br /> <br /> -Dan<br /> //[[User:Mehalana v|Vraj Mehalana]] 10:58, 12 September 2024 (PDT)<br /> <br /> =====Lab Closure Monday the 16th=====<br /> Fire Drill completed. Lab open. <br /> // [[User:Mehalana v|Vraj Mehalana]] 10:57, 12 September 2024 (PDT)<br /> <br /> =====MLA150: UP=====<br /> Optical AF has been calibrated and Defocus + Dose values are the same as before. PneuAF has not been checked et, but we expect a shift in PneuAF Defocus due to the Pneumatic nozzle replacement.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Stepper #3 (ASML DUV) - Down, update=====<br /> The alignment laser has now fully failed (no laser output at all), so we can't perform any exposures.<br /> ASML engineers will be on site Monday Tues (Sept 16th) to perform the repair.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====EBeam#2: Up=====<br /> Bell jar mount is in place. Hoist has been tested several times. System is ready to use.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====YES EcoClean UP=====<br /> The YES has been giving downstream temp warnings for the RF generator. These happen on the 3000W recipes that run for more than 4-5 minutes, and are just warnings (yellow banner/light), and can just be acknowledged without notifying Staff. Our other generator is out for repair, so this will be the norm until we get it back. Please let us know if you do get an error for this; red banner/light.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162358 2024-09-16T20:01:01Z

<p>Mehalana v: /* Focused Ion Beam (Raith Velion) - TOOL DOWN for Raith Service */</p> <hr /> <div>&lt;startfeed /&gt;<br /> =====IBD is UP=====<br /> Replaced bad PLC controller on Depo beam. I then tested the beam with a 15 min gridclean recipe without issue.<br /> I then ran an SiO2 dep, and a 1 hour gridclean without issue.<br /> <br /> System UP - Mike Barreraz<br /> // [[User:John_d|Demis D. John]] 14:18, 12 September 2024 (PDT)<br /> <br /> =====Focused Ion Beam (Raith Velion) - TOOL DOWN for Raith Service=====<br /> Raith service need to work on the Velion a little longer than anticipated. I'll keep the tool down until 2pm tomorrow (Tuesday). I'll send further updates if anything changes.<br /> <br /> -Dan<br /> //[[User:Mehalana v|Vraj Mehalana]] 10:58, 12 September 2024 (PDT)<br /> <br /> =====Lab Closure Monday the 16th=====<br /> We will be closing the Nanofab Monday, September 16, 2024 from 7 a.m. until 8:30 a.m. to accommodate the testing of the fire alarm system. Please schedule your process accordingly. <br /> // [[User:Mehalana v|Vraj Mehalana]] 10:57, 12 September 2024 (PDT)<br /> <br /> =====MLA150: UP=====<br /> Optical AF has been calibrated and Defocus + Dose values are the same as before. PneuAF has not been checked et, but we expect a shift in PneuAF Defocus due to the Pneumatic nozzle replacement.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Stepper #3 (ASML DUV) - Down, update=====<br /> The alignment laser has now fully failed (no laser output at all), so we can't perform any exposures.<br /> ASML engineers will be on site Monday Tues (Sept 16th) to perform the repair.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====EBeam#2: Up=====<br /> Bell jar mount is in place. Hoist has been tested several times. System is ready to use.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====YES EcoClean UP=====<br /> The YES has been giving downstream temp warnings for the RF generator. These happen on the 3000W recipes that run for more than 4-5 minutes, and are just warnings (yellow banner/light), and can just be acknowledged without notifying Staff. Our other generator is out for repair, so this will be the norm until we get it back. Please let us know if you do get an error for this; red banner/light.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162341 2024-09-12T17:58:59Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====Focused Ion Beam (Raith Velion) - TOOL DOWN for Raith Service=====<br /> Some users have experienced issues with column alignment when using Au ions. Raith service will be onsite today and tomrrow to make adjustments. I'll run checks and calibrations over the weekend. I expect the Raith Velion to be available again on Monday morning (Sept 16th). I'll send further updates if anything changes.<br /> <br /> -Dan<br /> //[[User:Mehalana v|Vraj Mehalana]] 10:58, 12 September 2024 (PDT)<br /> =====Lab Closure Monday the 16th=====<br /> We will be closing the Nanofab Monday, September 16, 2024 from 7 a.m. until 8:30 a.m. to accommodate the testing of the fire alarm system. Please schedule your process accordingly. <br /> // [[User:Mehalana v|Vraj Mehalana]] 10:57, 12 September 2024 (PDT)<br /> <br /> =====MLA150: UP=====<br /> Optical AF has been calibrated and Defocus + Dose values are the same as before. PneuAF has not been checked et, but we expect a shift in PneuAF Defocus due to the Pneumatic nozzle replacement.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Stepper #3 (ASML DUV) - Down, update=====<br /> The alignment laser has now fully failed (no laser output at all), so we can't perform any exposures.<br /> ASML engineers will be on site Monday Tues (Sept 16th) to perform the repair.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====IBD is DOWN=====<br /> The IBD is still Down, Depo failing to ignite. We will continue to look into these tomorrow.<br /> -- Barreraz // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====EBeam#2: Up=====<br /> Bell jar mount is in place. Hoist has been tested several times. System is ready to use.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====YES EcoClean: 3kW only=====<br /> The YES has been giving downstream temp warnings for the RF generator. These happen on the 3000W recipes that run for more than 4-5 minutes, and are just warnings (yellow banner/light), and can just be acknowledged without notifying Staff. Our other generator is out for repair, so this will be the norm until we get it back. Please let us know if you do get an error for this; red banner/light.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162340 2024-09-12T17:57:48Z

<p>Mehalana v: /* Lab Closure Monday the 16th */</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====Lab Closure Monday the 16th=====<br /> We will be closing the Nanofab Monday, September 16, 2024 from 7 a.m. until 8:30 a.m. to accommodate the testing of the fire alarm system. Please schedule your process accordingly. <br /> // [[User:Mehalana v|Vraj Mehalana]] 10:57, 12 September 2024 (PDT)<br /> <br /> =====MLA150: UP=====<br /> Optical AF has been calibrated and Defocus + Dose values are the same as before. PneuAF has not been checked et, but we expect a shift in PneuAF Defocus due to the Pneumatic nozzle replacement.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Stepper #3 (ASML DUV) - Down, update=====<br /> The alignment laser has now fully failed (no laser output at all), so we can't perform any exposures.<br /> ASML engineers will be on site Monday Tues (Sept 16th) to perform the repair.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====IBD is DOWN=====<br /> The IBD is still Down, Depo failing to ignite. We will continue to look into these tomorrow.<br /> -- Barreraz // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====EBeam#2: Up=====<br /> Bell jar mount is in place. Hoist has been tested several times. System is ready to use.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====YES EcoClean: 3kW only=====<br /> The YES has been giving downstream temp warnings for the RF generator. These happen on the 3000W recipes that run for more than 4-5 minutes, and are just warnings (yellow banner/light), and can just be acknowledged without notifying Staff. Our other generator is out for repair, so this will be the norm until we get it back. Please let us know if you do get an error for this; red banner/light.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162339 2024-09-12T17:57:37Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====Lab Closure Monday the 16th=====<br /> We will be closing the Nanofab Monday, September 16, 2024 from 7 a.m. until 8:30 a.m. to accommodate the testing of the fire alarm system. Please schedule your process accordingly. <br /> // 10:57, 12 September 2024 (PDT)<br /> <br /> =====MLA150: UP=====<br /> Optical AF has been calibrated and Defocus + Dose values are the same as before. PneuAF has not been checked et, but we expect a shift in PneuAF Defocus due to the Pneumatic nozzle replacement.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Stepper #3 (ASML DUV) - Down, update=====<br /> The alignment laser has now fully failed (no laser output at all), so we can't perform any exposures.<br /> ASML engineers will be on site Monday Tues (Sept 16th) to perform the repair.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====IBD is DOWN=====<br /> The IBD is still Down, Depo failing to ignite. We will continue to look into these tomorrow.<br /> -- Barreraz // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====EBeam#2: Up=====<br /> Bell jar mount is in place. Hoist has been tested several times. System is ready to use.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====YES EcoClean: 3kW only=====<br /> The YES has been giving downstream temp warnings for the RF generator. These happen on the 3000W recipes that run for more than 4-5 minutes, and are just warnings (yellow banner/light), and can just be acknowledged without notifying Staff. Our other generator is out for repair, so this will be the norm until we get it back. Please let us know if you do get an error for this; red banner/light.<br /> // [[User:John_d|Demis D. John]] 18:14, 11 September 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162333 2024-09-12T00:46:38Z

<p>Mehalana v: /* = */</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====Stepper #3 (ASML DUV) - Down, update<br /> =====Stepper #3 (ASML DUV) - Down, update=====<br /> Sorry to say, I was not able to remedy the wafer handling pick up issue, and the system still intermittent,y fails to pick up a wafer correctly. I might have a temporary workaround by using specific slots and such, but I would need to help you do this.<br /> I have ordered a replacement for the possibly failing WH board causing this.<br /> <br /> Let me know if you want to try and run one or two wafers through and I might be able to help you do this, but I was having difficulty getting exposures to run properly.<br /> <br /> To fix the main alignment, laser issue, Asml engineers will be on site Monday and Tuesday next week, so the tool will be down during that time to perform the repairs.<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 17:46, 11 September 2024 (PDT)<br /> <br /> =====LAB OPEN=====<br /> House vacuum repair has been completed, lab is open for use.<br /> //[[User:John_d|Demis D. John]] 12:13, 6 September 2024 (PDT) <br /> <br /> =====MLA150: Down=====<br /> Heidelberg engineer is on site working on repair, we will update as we learn more.<br /> // [[User:John_d|Demis D. John]] 12:13, 6 September 2024 (PDT)<br /> <br /> =====IBD is UP=====<br /> The IBD is back up.<br /> <br /> With Mike Silva's help, the fixture was recovered without having to vent the loadlock/chamber.<br /> // [[User:John_d|Demis D. John]] 20:48, 6 September 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> <br /> =====EBeam#2: Down=====<br /> Good news is we have repaired and reinstalled the hoist, thanks Mike B. and Bill. I have tested it and everything looks good.<br /> <br /> However, the repaired bell jar mount is not sliding down the hoist pole like it should. Since the repair involved some welding to the collar that slides down the hoist pole, we surmise that the concentricity was affected by the heat. The mount is back at the machine shop getting honed out. I should have it back to test late today/early tomorrow but it may have to go back again. Once it is able to slide on properly the tool should be up shortly thereafter.<br /> <br /> -Lee // [[User:John_d|Demis D. John]] 14:24, 27 August 2024 (PDT)<br /> <br /> =====YES EcoClean: 3kW only=====<br /> I swapped out the RF generator and the tool is working again. I am getting repeated CCP warnings for the 0.7kW recipes so we will need to look into that further. <br /> <br /> System is up for 3kW recipes only.<br /> <br /> DO NOT run 0.7kW recipes until further notice!!<br /> <br /> --<br /> Lee Sawyer//[[User:John_d|Demis D. John]] 11:31, 23 August 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162332 2024-09-12T00:46:13Z

<p>Mehalana v: /* ASML: intermittent alignment failures */</p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====Stepper #3 (ASML DUV) - Down, update<br /> =====<br /> Sorry to say, I was not able to remedy the wafer handling pick up issue, and the system still intermittent,y fails to pick up a wafer correctly. I might have a temporary workaround by using specific slots and such, but I would need to help you do this.<br /> I have ordered a replacement for the possibly failing WH board causing this.<br /> <br /> Let me know if you want to try and run one or two wafers through and I might be able to help you do this, but I was having difficulty getting exposures to run properly.<br /> <br /> To fix the main alignment, laser issue, Asml engineers will be on site Monday and Tuesday next week, so the tool will be down during that time to perform the repairs.<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 17:46, 11 September 2024 (PDT)<br /> <br /> =====LAB OPEN=====<br /> House vacuum repair has been completed, lab is open for use.<br /> //[[User:John_d|Demis D. John]] 12:13, 6 September 2024 (PDT) <br /> <br /> =====MLA150: Down=====<br /> Heidelberg engineer is on site working on repair, we will update as we learn more.<br /> // [[User:John_d|Demis D. John]] 12:13, 6 September 2024 (PDT)<br /> <br /> =====IBD is UP=====<br /> The IBD is back up.<br /> <br /> With Mike Silva's help, the fixture was recovered without having to vent the loadlock/chamber.<br /> // [[User:John_d|Demis D. John]] 20:48, 6 September 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> <br /> =====EBeam#2: Down=====<br /> Good news is we have repaired and reinstalled the hoist, thanks Mike B. and Bill. I have tested it and everything looks good.<br /> <br /> However, the repaired bell jar mount is not sliding down the hoist pole like it should. Since the repair involved some welding to the collar that slides down the hoist pole, we surmise that the concentricity was affected by the heat. The mount is back at the machine shop getting honed out. I should have it back to test late today/early tomorrow but it may have to go back again. Once it is able to slide on properly the tool should be up shortly thereafter.<br /> <br /> -Lee // [[User:John_d|Demis D. John]] 14:24, 27 August 2024 (PDT)<br /> <br /> =====YES EcoClean: 3kW only=====<br /> I swapped out the RF generator and the tool is working again. I am getting repeated CCP warnings for the 0.7kW recipes so we will need to look into that further. <br /> <br /> System is up for 3kW recipes only.<br /> <br /> DO NOT run 0.7kW recipes until further notice!!<br /> <br /> --<br /> Lee Sawyer//[[User:John_d|Demis D. John]] 11:31, 23 August 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162328 2024-09-05T23:04:18Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> =====IBD is down untilll further notice=====<br /> The fixture was not on the transfer arm properly when it was being loaded into the chamber, which caused it to be jammed in the slip valve between the loadlock and chamber.<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:04, 5 September 2024 (PDT)<br /> <br /> =====LAB CLOSED 8a-9am, Friday Sept 5th, 2024=====<br /> We need to change the oil in our house vacuum system tomorrow morning from 8 a.m. until 9 a.m. please schedule your process accordingly. I apologize for the short notice. <br /> <br /> Thanks,<br /> <br /> Michael Silva<br /> // [[User:John_d|Demis D. John]] 09:27, 5 September 2024 (PDT)<br /> <br /> =====MLA150: Down=====<br /> The tool is currently unavailable while we address the current issue we are experiencing with the head. Sorry for any inconvenience this may have caused.<br /> <br /> Thanks<br /> Bill Millerski<br /> <br /> // [[User:John_d|Demis D. John]] 11:51, 5 September 2024 (PDT)<br /> <br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> <br /> =====EBeam#2: Down=====<br /> Good news is we have repaired and reinstalled the hoist, thanks Mike B. and Bill. I have tested it and everything looks good.<br /> <br /> However, the repaired bell jar mount is not sliding down the hoist pole like it should. Since the repair involved some welding to the collar that slides down the hoist pole, we surmise that the concentricity was affected by the heat. The mount is back at the machine shop getting honed out. I should have it back to test late today/early tomorrow but it may have to go back again. Once it is able to slide on properly the tool should be up shortly thereafter.<br /> <br /> -Lee // [[User:John_d|Demis D. John]] 14:24, 27 August 2024 (PDT)<br /> <br /> =====YES EcoClean: 3kW only=====<br /> I swapped out the RF generator and the tool is working again. I am getting repeated CCP warnings for the 0.7kW recipes so we will need to look into that further. <br /> <br /> System is up for 3kW recipes only.<br /> <br /> DO NOT run 0.7kW recipes until further notice!!<br /> <br /> --<br /> Lee Sawyer//[[User:John_d|Demis D. John]] 11:31, 23 August 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162316 2024-09-03T19:43:59Z

<p>Mehalana v: /* Wafer Bonder, (Suss SB6-8E) */</p> <hr /> <div>&lt;startfeed /&gt;<br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====MLA150: Down=====<br /> The tool is down due to the intermittent head crash issue. I am waiting to hear back from the vendor as to when we will have someone out to look at it. --Lee <br /> <br /> // [[User:John_d|Demis D. John]] 16:40, 28 August 2024 (PDT)<br /> <br /> =====EBeam#2: Down=====<br /> Good news is we have repaired and reinstalled the hoist, thanks Mike B. and Bill. I have tested it and everything looks good.<br /> <br /> However, the repaired bell jar mount is not sliding down the hoist pole like it should. Since the repair involved some welding to the collar that slides down the hoist pole, we surmise that the concentricity was affected by the heat. The mount is back at the machine shop getting honed out. I should have it back to test late today/early tomorrow but it may have to go back again. Once it is able to slide on properly the tool should be up shortly thereafter.<br /> <br /> -Lee // [[User:John_d|Demis D. John]] 14:24, 27 August 2024 (PDT)<br /> <br /> =====YES EcoClean: 3kW only=====<br /> I swapped out the RF generator and the tool is working again. I am getting repeated CCP warnings for the 0.7kW recipes so we will need to look into that further. <br /> <br /> System is up for 3kW recipes only.<br /> <br /> DO NOT run 0.7kW recipes until further notice!!<br /> <br /> --<br /> Lee Sawyer//[[User:John_d|Demis D. John]] 11:31, 23 August 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162315 2024-09-03T19:43:33Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> =====Suss SB6-8E=====<br /> When the vendor came in to install the new top heater he wasn't able to get the z-axis (elevator motor) to move. He was able to install the new heater and do a PM on the rest of the tool. We are ordering a new z-axis controller on the recommendation of the vendor. If all goes well this should solve the issue and make the bonder fully operational. I'll send out an email once the new controller has been installed.<br /> <br /> -Aidan<br /> //[[User:Mehalana v|Vraj Mehalana]] 12:43, 3 September 2024 (PDT)<br /> <br /> =====MLA150: Down=====<br /> The tool is down due to the intermittent head crash issue. I am waiting to hear back from the vendor as to when we will have someone out to look at it. --Lee <br /> <br /> // [[User:John_d|Demis D. John]] 16:40, 28 August 2024 (PDT)<br /> <br /> =====EBeam#2: Down=====<br /> Good news is we have repaired and reinstalled the hoist, thanks Mike B. and Bill. I have tested it and everything looks good.<br /> <br /> However, the repaired bell jar mount is not sliding down the hoist pole like it should. Since the repair involved some welding to the collar that slides down the hoist pole, we surmise that the concentricity was affected by the heat. The mount is back at the machine shop getting honed out. I should have it back to test late today/early tomorrow but it may have to go back again. Once it is able to slide on properly the tool should be up shortly thereafter.<br /> <br /> -Lee // [[User:John_d|Demis D. John]] 14:24, 27 August 2024 (PDT)<br /> <br /> =====YES EcoClean: 3kW only=====<br /> I swapped out the RF generator and the tool is working again. I am getting repeated CCP warnings for the 0.7kW recipes so we will need to look into that further. <br /> <br /> System is up for 3kW recipes only.<br /> <br /> DO NOT run 0.7kW recipes until further notice!!<br /> <br /> --<br /> Lee Sawyer//[[User:John_d|Demis D. John]] 11:31, 23 August 2024 (PDT)<br /> <br /> =====Wafer Bonder, (Suss SB6-8E)=====<br /> A third party bonder repair company will be out here the week of the 26th. The goal is to install the new top heater and then to do a full PM. If all goes well the tool will be available to use late that week. I’ll send out another email once I have more information. Thanks, Aidan.<br /> <br /> // [[User:John_d|Demis D. John]] 15:52, 6 August 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162168 2024-08-06T20:34:49Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====Wafer Bonder=====<br /> The issues still remain but the investigation is pointing to a couple of boards in an external control computer. JEOL service are running a test overnight to try isolate the issue. Hopefully more will be known in the morning. <br /> <br /> System down for now...<br /> //[[User:Mehalana v|Vraj Mehalana]] 13:34, 6 August 2024 (PDT)<br /> <br /> =====Unaxis ICP-PECVD Update=====<br /> Unfortunately the shipment of repaired parts was significantly delayed. I will be installing them and testing on Tuesday. With any luck the system will be available Tuesday evening.<br /> <br /> Tony<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:26, 26 July 2024 (PDT)<br /> <br /> =====Dicing Saw Service Visit=====<br /> The annual PM on the tool has been completed. However, there is still the issue with the chuck not rotating a perfect 90 degrees after aligning the first angle, so you will still have to perform alignment for angle #2. ADT is looking into sending us a cal plate to try and rectify this as the first potential solution.<br /> <br /> -Lee<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 10:23, 8 July 2024 (PDT)<br /> <br /> =====Velion FIB Tool DOWN=====<br /> Raith service have completed the source change, resolved the power supply and column alignment issues, and restored the Pt deposition capability to full capacity. With remote assistance from Raith I will run some calibrations and stability tests over the next few days. After that I will return the tool to general use towards the end of the week.<br /> <br /> The new ion source is AuGeSi. We have no plans to return to GaBiLi for the foreseeable future. Please get in contact if you have any questions.<br /> <br /> -Dan<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 10:23, 8 July 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> =====Wafer Bonder, (Suss SB6-8E)=====<br /> SUSS aims to be on site in early February. We’ll will send out an email once I get confirmation for a specific date.<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 14:23, 13 December 2023 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v https://wiki.nanofab.ucsb.edu/w/index.php?title=Template:Announcements&diff=162155 2024-08-01T01:52:34Z

<p>Mehalana v: </p> <hr /> <div>&lt;startfeed /&gt;<br /> <br /> =====(JEOL JBX-6300FS) - 07/31: System still DOWN=====<br /> The issues still remain but the investigation is pointing to a couple of boards in an external control computer. JEOL service are running a test overnight to try isolate the issue. Hopefully more will be known in the morning. <br /> <br /> System down for now...<br /> //[[User:Mehalana v|Vraj Mehalana]] 18:52, 31 July 2024 (PDT)<br /> <br /> =====Unaxis ICP-PECVD Update=====<br /> Unfortunately the shipment of repaired parts was significantly delayed. I will be installing them and testing on Tuesday. With any luck the system will be available Tuesday evening.<br /> <br /> Tony<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:26, 26 July 2024 (PDT)<br /> <br /> =====Dicing Saw Service Visit=====<br /> The annual PM on the tool has been completed. However, there is still the issue with the chuck not rotating a perfect 90 degrees after aligning the first angle, so you will still have to perform alignment for angle #2. ADT is looking into sending us a cal plate to try and rectify this as the first potential solution.<br /> <br /> -Lee<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 10:23, 8 July 2024 (PDT)<br /> <br /> =====Velion FIB Tool DOWN=====<br /> Raith service have completed the source change, resolved the power supply and column alignment issues, and restored the Pt deposition capability to full capacity. With remote assistance from Raith I will run some calibrations and stability tests over the next few days. After that I will return the tool to general use towards the end of the week.<br /> <br /> The new ion source is AuGeSi. We have no plans to return to GaBiLi for the foreseeable future. Please get in contact if you have any questions.<br /> <br /> -Dan<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 10:23, 8 July 2024 (PDT)<br /> <br /> =====ICP1 Down=====<br /> The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.<br /> //[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)<br /> <br /> =====Lab Access Changes: Symmetry App=====<br /> The iris scanner has been decommissioned. Please use the card reader which supports:<br /> <br /> -Physical card<br /> <br /> -Mobile phone via Symmetry App<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 16:59, 14 June 2024 (PDT)<br /> <br /> =====Wafer Bonder, (Suss SB6-8E)=====<br /> SUSS aims to be on site in early February. We’ll will send out an email once I get confirmation for a specific date.<br /> <br /> //[[User:Mehalana v|Vraj Mehalana]] 14:23, 13 December 2023 (PST)<br /> <br /> &lt;!--<br /> SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.<br /> In order for your post to show up correctly, you need to:<br /> &gt;&gt; Use FIVE equal-signs for the Title's heading level. eg.: ===== my post =====<br /> &gt;&gt; Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~<br /> --&gt;<br /> &lt;!---------DO NOT EDIT BELOW THIS LINE-----------&gt;<br /> &lt;endfeed /&gt;<br /> &lt;noinclude&gt;[[Category:Templates]]&lt;/noinclude&gt;<br /> &lt;!--------------------------------------------<br /> ====== HOW TO ADD ITEMS ======<br /> * You can copy/paste the example below for a new news item.<br /> * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way. (This looks best on the Wiki homepage)<br /> * You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed. <br /> * Use double-slash: // at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.<br /> * Optional: After saving the page, delete the name after the two dashes &quot;--&quot; and delete the &quot;[[(talk)...]]&quot; link. <br /> * Please use &quot;There are no announcements at this time.&quot; if the announcements are empty.<br /> <br /> * URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> * URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&amp;action=feed&amp;feed=rss<br /> <br /> <br /> ******** EXAMPLE OF A NEW POST ********<br /> <br /> ===== NanoFab making LN2 icecream =====<br /> Tomorrow the NanoFab will be serving liquid nitrogen ice cream.<br /> // [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)<br /> <br /> ************* (end of example) **************<br /> The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username &amp; timestamp after you submit the post.<br /> ----------------------------------------------&gt;</div>

Mehalana v