Nanofab New User Onboarding - Revision history

John d at 21:52, 12 October 2023

2023-10-12T21:52:30Z

← Older revision		Revision as of 21:52, 12 October 2023
Line 3:		Line 3:
	This is ''after'' you have done the Lab Orientation with [[Mike Silva]].		This is ''after'' you have done the Lab Orientation with [[Mike Silva]].

	You should already have a UCSB NetID, [https://signupmonkey.ece.ucsb.edu signupmonkey] login - contact [[Claudia Gutierrez\|Claudia]] and [[Brian Thibeault\|Brian]] if you have issues with these.		You should already have a UCSB NetID & separate [https://signupmonkey.ece.ucsb.edu signupmonkey] login - contact [[Claudia Gutierrez\|Claudia]] and [[Brian Thibeault\|Brian]] if you have issues with these.

	Please check the [[Frequently Asked Questions]] page for common issues - such as getting Wifi access, who to contact for help etc.		Please check the [[Frequently Asked Questions]] page for common issues - such as getting Wifi access, who to contact for help etc.

John d: silva's corrections

2023-09-27T16:37:27Z

silva's corrections

← Older revision		Revision as of 16:37, 27 September 2023
Line 3:		Line 3:
	This is ''after'' you have done the Lab Orientation with [[Mike Silva]].		This is ''after'' you have done the Lab Orientation with [[Mike Silva]].

	You should already have a UCSB NetID, signupmonkey ~~login~~ ~~and~~ - contact [[Claudia Gutierrez\|Claudia]] and [[Brian Thibeault\|Brian]] if you have issues with these.		You should already have a UCSB NetID, [https://signupmonkey.ece.ucsb.edu signupmonkey] login - contact [[Claudia Gutierrez\|Claudia]] and [[Brian Thibeault\|Brian]] if you have issues with these.

			Please check the [[Frequently Asked Questions]] page for common issues - such as getting Wifi access, who to contact for help etc.

	<br />		<br />

	=== If you are the first user in your research group to use the NanoFab ===		===If you are the first user in your research group to use the NanoFab===

		⚫	*Contact [[Bill Millerski]] for a new shelf space and storage bins for your research group.
	* Take a blue-tote from the gowning room, write your GROUP name and YOUR name on all sides of the box with permanent marker.
	* Place the tote on the "NNIN-Industrial" space near the windows.
⚫	* Contact [[Bill Millerski]] for a new shelf space for your research group.

	* Contact [[Luis Zuzunaga]] to get a new space for photoresist storage in the Bay 6 PR cabinet.		*Contact [[Luis Zuzunaga]] to get a new space for photoresist storage in the Bay 6 PR cabinet.

	<br />		<br />

	=== ~~All new users~~ ===		===Nametags===

	* ~~Contact~~ [[Peder Lenvik]] for a new nametag. This will be placed on the metal table ''outside'' the gowning room - please pick it up at your convenience.		*You should have received a nametag at the Lab Orientation. If you lose it or need a replacement, contact [[Peder Lenvik]] for a new nametag. This will be placed on the metal table ''outside'' the gowning room - please pick it up at your convenience.<br />

	<br />

	=== Supplies you will need ===		===Lab Supplies you will need===
	If your group uses the lab, you likely already have many of these.		If your group uses the lab, you likely already have many of these.

	* Glassware - beakers and dishes for chemicals, such as		*Glassware - beakers and dishes for chemicals, such as
	** Solvents (Acetone / Isopropanol / Photoresist strippers)		**Solvents (Acetone / Isopropanol / Photoresist strippers)
	** Developer + Water		**Developer + Water
	** Acids/Bases + Water		**Acids/Bases + Water
	*** Watchglass lids		***Watchglass lids
	** Choose glassware large enough for your wafer/piece sizes, including extra space for dippers baskets etc.		**Choose glassware large enough for your wafer/piece sizes, including extra space for dippers baskets etc.
	** Have 2-3 extra just in case		**Have 2-3 extra just in case
	** For the most part, you can re-use glassware for multiple chemicals, just clean after use and re-label appropriately when needed.		**For the most part, you can re-use glassware for multiple chemicals, just clean after use and re-label appropriately when needed.
	* Tweezers - choose the right size/type for your sample sizes.		*Tweezers - choose the right size/type for your sample sizes.
	** Metal and Plastic-tipped tweezers		**Metal and Plastic-tipped tweezers
	** If you're using full wafers, we recommend 4-inch wafer tweezers. High-temp PEEK-tipped tweezers are very good for reducing particulates/chipping.		**If you're using full wafers, we recommend 4-inch wafer tweezers. High-temp PEEK-tipped tweezers are very good for reducing particulates/chipping.
	* Computer/tablet - these can be brought into the lab by wiping down in the gowning room. '''No Cloth cases''' - only plastic/metal/glass please!		*Computer/tablet - these can be brought into the lab by wiping down in the gowning room. '''No Cloth cases''' - only plastic/metal/glass please!
	* Wafers/substrates, and containers such as wafer trays/cases.		*Wafers/substrates, and containers such as wafer trays/cases.
	* Pens - permanent marker recommended for marking glassware. No particle-generating utensils (pencils)		*Pens - permanent marker recommended for marking glassware. No particle-generating utensils (pencils)

	Most other required supplies are provided by the lab. (Such as photoresists, developers, acids/bases, metals for evaporation/sputter, cleanroom-compatible notebooks).		Most other required supplies are provided by the lab. (Such as photoresists, developers, acids/bases, metals for evaporation/sputter, cleanroom-compatible notebooks).

John d: inital page

2023-09-25T22:41:27Z

inital page

New page

Checklist for new internal-UCSB lab users.

This is ''after'' you have done the Lab Orientation with [[Mike Silva]].

You should already have a UCSB NetID, signupmonkey login and - contact [[Claudia Gutierrez|Claudia]] and [[Brian Thibeault|Brian]] if you have issues with these.

<br />

=== If you are the first user in your research group to use the NanoFab ===

* Take a blue-tote from the gowning room, write your GROUP name and YOUR name on all sides of the box with permanent marker.
* Place the tote on the "NNIN-Industrial" space near the windows.
* Contact [[Bill Millerski]] for a new shelf space for your research group.

* Contact [[Luis Zuzunaga]] to get a new space for photoresist storage in the Bay 6 PR cabinet.

<br />

=== All new users ===

* Contact [[Peder Lenvik]] for a new nametag. This will be placed on the metal table ''outside'' the gowning room - please pick it up at your convenience.

<br />

=== Supplies you will need ===
If your group uses the lab, you likely already have many of these.

* Glassware - beakers and dishes for chemicals, such as
** Solvents (Acetone / Isopropanol / Photoresist strippers)
** Developer + Water
** Acids/Bases + Water
*** Watchglass lids
** Choose glassware large enough for your wafer/piece sizes, including extra space for dippers baskets etc.
** Have 2-3 extra just in case
** For the most part, you can re-use glassware for multiple chemicals, just clean after use and re-label appropriately when needed.
* Tweezers - choose the right size/type for your sample sizes.
** Metal and Plastic-tipped tweezers
** If you're using full wafers, we recommend 4-inch wafer tweezers. High-temp PEEK-tipped tweezers are very good for reducing particulates/chipping.
* Computer/tablet - these can be brought into the lab by wiping down in the gowning room. '''No Cloth cases''' - only plastic/metal/glass please!
* Wafers/substrates, and containers such as wafer trays/cases.
* Pens - permanent marker recommended for marking glassware. No particle-generating utensils (pencils)

Most other required supplies are provided by the lab. (Such as photoresists, developers, acids/bases, metals for evaporation/sputter, cleanroom-compatible notebooks).
<br />