View source for Ovens - Overview of All Lab Ovens

[https://wiki.nanotech.ucsb.edu/w/index.php?title=Tool_List#Thermal_Processing See the full list of Thermal Processing tools here.]
{| class="wikitable sortable"
|+List of all lab ovens and capabilities/uses
!Oven Name + Link
!Temperature Range/Capabilities
!Programmable
!Gases
!Vacuum/Pressure Range
!Typical Uses
!SignupMonkey Reservation
|-
|[[Ovens 1, 2 & 3 (Labline)|Oven 1]]
|
* Typically 95°C
* Passive Cooling
|No, single temperature.
|N/A
|Atmosphere only
|Drying glassware, general baking.
|No.  Users may change temperature.
|-
|[[Ovens 1, 2 & 3 (Labline)|Oven 2]]
|
* Typically 100°C
* Passive Cooling
|No, single temperature.
|N/A
|Atmosphere only
|Drying glassware, general baking.
|No.  Users may change temperature.
|-
|[[Oven 4 (Thermo-Fisher HeraTherm)|Oven 4: HeraTherm Oven]]
|
* Max. Temp = 330°C
* Passive Cooling, optional vent to atmosphere for speed.
|
* Multi-step programmable
* Ramp Rate: only low/med/high (not numeric ramp rate).
* Gas flow not programmable
|
* N2 (manual flow valve)
* Atmosphere Purge
|Atmosphere only
|Bonding, BCB/Polymer curing.
|[https://signupmonkey.ece.ucsb.edu/cgi-bin/users/browse.cgi?tool_ID=68 Sign Up For This Tool]
(Also log in logbook)
|-
|[[High Temp Oven (Blue M)|Blue-M Oven]]
|
* Max. temp. 350°C
* Passive Cooling
|
* Yes, fully programmable up to 2 stages.
* Gas flow not programmable
|
* N2 (manual flow setting)
|Atmosphere only
|BCB/Polymer curing.
|[http://signupmonkey.ece.ucsb.edu/cgi-bin/users/browse.cgi?tool_ID=56 Sign Up For This Tool]
|-
|
|
*
* 
|
|
* 
|
|
|
|}