Unused files

The following files exist but are not embedded in any page. Please note that other websites may link to a file with a direct URL, and so may still be listed here despite being in active use.

Showing below up to 50 results in range #301 to #350.

• 
  SiN-AJA-1-Reactive-Sputtering-Power-Flow-AFM-Rate-Index-rev1.pdf ; 336 KB
  
• 
  New PECVD1-SiO2-standard recipe 2014 SiO2 standard recipe.pdf ; 594 KB
  
• 
  New PECVD1-SiN-standard recipe 2014 SiN standard recipe.pdf ; 595 KB
  
• 
  New PECVD1-LS SION-recipe 2014 LS SION recipe.pdf ; 1.59 MB
  
• 
  New Adv PECVD OXIDE 300C standard recipe OXIDE Standard Recipe.pdf ; 653 KB
  
• 
  New Adv PECVD-Nitride2 300C standard recipe Nitride2 Standard Recipe.pdf ; 373 KB
  
• 
  New Adv PECVD-LS Nitride2 300C standard recipe LS Nitride2 standard recipe.pdf ; 378 KB
  
• 
  32-Reducing AlCl3 Corrosion with CHF3 plasma.pdf ; 636 KB
  
• 
  33-Etching SiO2 with Vertical Side-wall.pdf ; 924 KB
  
• 
  Web Operational Procedure EB4 Rev 5.pdf ; 727 KB
  
• 
  ASML Job Set-Up Guide v2.pdf ; 1.81 MB
  
• 
  GCA 6300 Training Manual-4-10-2015.pdf ; 257 KB
  
• 
  Autostep 200 Training Manual-4-10-15 .pdf ; 252 KB
  
• 
  35-Low-stress SiNx at 250 C using Unaxis ICP deposition tool.pdf ; 118 KB
  
• 
  34-High-stress SiNx at 250 C using Unaxis ICP deposition tool.pdf ; 10 KB
  
• 
  36-Medium-stress SiNx using Unaxis ICP deposition tool.pdf ; 16 KB
  
• 
  37-Low-stress SiNx at 100 C using Unaxis ICP deposition tool.pdf ; 169 KB
  
• 
  38-High-stress SiNx at 100 C using Unaxis ICP deposition tool.pdf ; 43 KB
  
• 
  39-Medium-stress SiNx at 100C using Unaxis ICP deposition tool.pdf ; 48 KB
  
• 
  Cluster operating instructions.pdf ; 423 KB
  
• 
  42-Etching Platinum using Oxford Ion Mill Tool.pdf ; 1.62 MB
  
• 
  42-Etching Platinum using Oxford Ion Mill Tool-a.pdf ; 1.62 MB
  
• 
  Pages from FEI - Scanning Electrong Microscope - Operating Manual PART 1.pdf ; 3.22 MB
  
• 
  Pages from FEI - Scanning Electrong Microscope - Operating Manual PART 2.pdf ; 3.91 MB
  
• 
  Pages from FEI - Scanning Electrong Microscope - Operating Manual PART 3.pdf ; 3.02 MB
  
• 
  PEK-162-Positive-Resist-Datasheet.pdf ; 294 KB
  
• 
  43-Issue with the etch of InP-InGaAs-and- InAlAs-b.pdf ; 838 KB
  
• 
  44-Etching Gold with Al2O3 Mask using Oxford Ion Mill Tool.pdf ; 2.28 MB
  
• 
  Ion Beam Etch Overview rev1.pdf ; 441 KB
  
• 
  45-Etching Nickel with Al2O3 Mask using Oxford Ion Mill Tool.pdf ; 1.87 MB
  
• 
  Fe and Co Films using Sputter-3.pdf ; 25 KB
  
• 
  46-Mo Film using Sputter3.pdf ; 143 KB
  
• 
  LabRules2015.pdf ; 156 KB
  
• 
  47-Photolithography of SU8-2005.pdf ; 1.55 MB
  
• 
  48-Photolithography of SU8-2010.pdf ; 360 KB
  
• 
  49-Photolithography of SU8-2015-a.pdf ; 327 KB
  
• 
  50-InP Etch-2-17-2016.pdf ; 842 KB
  
• 
  Surfscan-Surfscan 6200 info.pdf ; 114 KB
  
• 
  ASML Job Set-Up Guide simple v1.pdf ; 1.6 MB
  
• 
  10-Si Etch Bosch Release DRIE.pdf ; 533 KB
  
• 
  Amorphous Silicon Film Deposition using 12.5W bias on SiO2-Si.pdf ; 943 KB
  
• 
  ASi deposition and film stress using AV dep tool.pdf ; 1.07 MB
  
• 
  Ta and Cr E-beam deposition and wet etch test.pdf ; 600 KB
  
• 
  ITO Deposition-250C-Ebeam2-HCl-Wet-Etch.pdf ; 259 KB
  
• 
  ZnS Plasma Etch-1.pdf ; 668 KB
  
• 
  InGaAsSb etch.pdf ; 47 KB
  
• 
  SiO2-Etch-Recipe-using-RIE-3-a.pdf ; 283 KB
  
• 
  Ni Sputtering Film using Sputter 3.pdf ; 383 KB
  
• 
  Ti Sputtering Film using Sputter 3.pdf ; 276 KB
  
• 
  Ni Sputtering Film using Sputter 3-a.pdf ; 436 KB