Plasma Clean (Gasonics 2000)

From UCSB Nanofab Wiki
Revision as of 14:37, 1 July 2012 by Zwarburg (talk | contribs) (Created page with "{{tool|{{PAGENAME}} |picture=Gasonics.jpg |type = Dry Etch |super= Mike Silva |phone=(805)839-3918x219 |location=Bay 5 |email=silva@ece.ucsb.edu |description = Aura 2000-LL Downs…")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Plasma Clean (Gasonics 2000)
Gasonics.jpg
Tool Type Dry Etch
Location Bay 5
Supervisor Mike Silva
Supervisor Phone (805) 893-3096
Supervisor E-Mail silva@ece.ucsb.edu
Description Aura 2000-LL Downstream Asher
Manufacturer Gasonics
Dry Etch Recipes


About

The Aura 2000 system is a microwave downstream asher used for the removal of resist and other organic materials. Samples are loaded onto 8” carrier wafers into the system. Samples can be heated from 100C to above 350C by heat lamps, while being exposed to microwave-cracked oxygen to remove organic materials. The microwave excitation of the oxygen is done downstream from the chamber and the reactive oxygen flows through a showerhead to expose the sample, thus completely eliminating ion bombardment. Resist etch rates of several microns per minute can be achieved and is also effective on fluorine and chlorine plasma exposed resist.