Probe Station & Curve Tracer

Probe Station & Curve Tracer Tool Type Inspection, Test and Characterization Location Bay 4 Supervisor Tony Bosch Supervisor Phone (805) 893-3486 Supervisor E-Mail bosch@ece.ucsb.edu Description Probe Station Manufacturer Various

About

The probe station in the cleanroom is set up for up to four-point probing of two terminal and three terminal devices. The probe station is a Signatone station with a 2” diameter vacuum chuck. Four probes are provided. The measurements are taken with an HP xxxx 4-point probe measuring system or on a Tektronix 370A programmable curve tracer. The curve tracer can be controlled by a computer to get portable data. FETs, HBTs, diodes, and contact resistance measurements are typically done on this system. The 370A curve tracer is capable of pulsed and DC operation.

Equipment Specifications

• 4 probe station
• HP xxxx 4-point resistance meter
• Tektronix 370A computer controlled curve tracer
• Pulsed and DC characterization of 2 and 3 terminal devices in clean environment