Difference between revisions of "Oven 5 (Labline)"

From UCSB Nanofab Wiki
Jump to navigation Jump to search
Line 4: Line 4:
*[[ media: Watlow_982_controller.pdf|Operating Instructions]]  
*[[ media: Watlow_982_controller.pdf|Operating Instructions Chapter 7]]
=Oven 5=
=Oven 5=

Revision as of 14:23, 9 February 2017


The oven temperature can be controlled from 30C-200C with a ramp rate between 0.1C-1.0C/min. Maximum temperature is 200C. There is a N2 purge to provide a dry intert atmosphere during use.


Oven 5

Oven 5 (Labline)
Tool Type Lithography
Location Bay 5
Supervisor Brian Lingg
Supervisor Phone (805) 893-8145
Supervisor E-Mail lingg_b@ucsb.edu
Description ?
Manufacturer Labline