Difference between revisions of "Template:Announcements"

Latest revision as of 10:55, 23 May 2024

Atomic Force Microscope (Dimension ICON) - 05/17: System UP

Head was repaired and returned today. A quick test showed correct performance. Note also that the pin board has been repaired so all 4 pins are now present. Lets keep it that way so please be careful when loading the tip holder!

//Vraj Mehalana 13:46, 20 May 2024 (PDT)

MA6 TSA is down - Update

We have received the replacement motor for the TSA Y axis. The FSE will be onsite Monday June 3rd to work on the tool.

The tool remains up for backside alignment and topside exposures that do not require alignment.

-Lee //15:59, 22 May 2024 (PDT)

Velion FIB Tool DOWN

Raith service are installing and aligning a new GaBiLi source. The Velion FIB column is not available to users until further notice.

//Vraj Mehalana 10:58, 30 April 2024 (PDT)

Stepper #3 (ASML DUV) - Pneumatics repaired, extra day for optics

We were able to repair the pneumatics issue and are currently running reticle and wafer reproducability runs overnight to exercise/test the system.

Consequently the optics was only started today, so will take one day longer than planned - we will extend this visit to Thursday to complete the work.

Sorry for the inconvenience.

//Vraj Mehalana 19:04, 21 May 2024 (PDT)

ICP1 Down

The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps. //Vraj Mehalana 14:17, 1 March 2024 (PST)

Lab Access Changes: Symmetry App

The iris scanner has been decommissioned. Please use the card reader which supports:

-Physical card

-Mobile phone via Symmetry App

//10:54, 23 May 2024 (PDT)

Wafer Bonder, (Suss SB6-8E)

SUSS aims to be on site in early February. We’ll will send out an email once I get confirmation for a specific date. //Vraj Mehalana 14:23, 13 December 2023 (PST)

@@ Line 1: / Line 1: @@
 <startfeed />
+=====Atomic Force Microscope (Dimension ICON) - 05/17: System UP=====
-<!--feedBurner name="UCSBNanofab-Announcements" /-->
+Head was repaired and returned today.  A quick test showed correct performance.  Note also that the pin board has been repaired so all 4 pins are now present.  Lets keep it that way so please be careful when loading the tip holder!
-<!-- Description of the RSS feed -->
-'''''Equipment Status'''''
-----
-<!--
-SEE THE BOTTOM OF THIS PAGE FOR INSTRUCTIONS ON ADDING NEWS ITEMS.
+//[[User:Mehalana v|Vraj Mehalana]] 13:46, 20 May 2024 (PDT)
-Please use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
--->
-<!---------------------------------------------->
-<!------------- Equipment Status ---------------->
-===== Nanofab Closure for Thanksgiving =====
-The Nanofab will be closed from Wed. Nov. 25 at 9pm until Sat. Nov. 28 at 5:30am in observance of the Thanksgiving holiday.  Users are not permitted to enter the facility during these times.
-// [[User:Thibeault|Thibeault]] 21:38, 18 November 2020 (PST)
-===== Weekly Testing strongly urged for UCSB Students/Staff =====
+=====MA6 TSA is down - Update=====
+We have received the replacement motor for the TSA Y axis. The FSE will be onsite Monday June 3rd to work on the tool.
-Free weekly COVID testing is available to UCSB Staff, Faculty and Students. UCSB employees are strongly urged to sign up for weekly testing, which takes only minutes, is administered on-campus and is free of charge.
+The tool remains up for backside alignment and topside exposures that do not require alignment.
-Weekly recurring appointments can be made as follows:
-* Log on to the [https://studenthealthoc.sa.ucsb.edu/login_dualauthentication.aspx '''UCSB Testing Patient Portal'''] using your UCSB NetID and password.
-* Select “''Appointments''” and then select “''COVID-19 Services''.”
-* Select “''I need to schedule my weekly COVID-19 testing''” and answer the questions.
-* Select an available date and time and click “''Continue''.”
-* Confirm your appointment date and time and then click “''Schedule''.”
-** Note: You must click “''Schedule''” or your appointment will not be confirmed. Also, be sure to add the appointment time and location to your calendar.
+-Lee
-The Chancellor's [https://chancellor.ucsb.edu/memos/2020-10-15-recommended-covid-19-asymptomatic-campus-testing-program-faculty-staff-and memo to campus with details can be found here].
+//15:59, 22 May 2024 (PDT)
-===== UCSB Flu Vaccination Mandate =====
+=====Velion FIB Tool DOWN=====
+Raith service are installing and aligning a new GaBiLi source. The Velion FIB column is not available to users until further notice.
-UCSB Students, Staff and Faculty are required to recieve a Flu Vaccine by Nov. 1st. <br>Please see the '''[[COVID-19_User_Policies#UCSB_Flu_Vaccination_Mandate|COVID19 Page]]''' for relevant links and information.
-// [[User:John d|John d]] 19:47, 13 October 2020 (PDT)
+//[[User:Mehalana v|Vraj Mehalana]] 10:58, 30 April 2024 (PDT)
-===== NanoFab COVID Protocols =====
-Following guidelines provided by our Office of Research, the UCSB Nanofabrication Facility is open only for limited/authorized use for critical activity at this time.
+=====Stepper #3 (ASML DUV) - Pneumatics repaired, extra day for optics=====
-Contact the [[Brian Thibeault|Lab Director]] for more information.
+We were able to repair the pneumatics issue and are currently running reticle and wafer reproducability runs overnight to exercise/test the system.
+Consequently the optics was only started today, so will take one day longer than planned - we will extend this visit to Thursday to complete the work.
-''The most recent COVID Protocols can be found at '''[[COVID-19_User_Policies]]'''.''
+Sorry for the inconvenience.
-// [[User:John d|John d]] 15:00, 19 July 2020 (PDT)
+//[[User:Mehalana v|Vraj Mehalana]] 19:04, 21 May 2024 (PDT)
-===== New Tool Installations =====
-See the [https://wiki.nanotech.ucsb.edu/w/index.php/Main_Page#mp-trivia-h2 News Feed] for info on two upcoming tool installations!
+=====ICP1 Down=====
-The [https://www.raith.com/products/velion.html?mobile=0 Raith Velion FIB] is up and running, and [[Dan_Read|Dr. Dan Read]] is qualifying the tool.  See the [[Focused_Ion-Beam_Lithography_(Raith_Velion)|Velion's Tool page here]].
+The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.
+//[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)
+=====Lab Access Changes: Symmetry App=====
-The Heidelberg Maskless Aligner has been installed, and is in the process of being qualified/characterized.  See the [[Maskless_Aligner_(Heidelberg_MLA150)|MLA150's tool page here]].
+The iris scanner has been decommissioned. Please use the card reader which supports:
+-Physical card
-// [[User:John d|John d]] 09:10, 18 July 2020 (PDT)
+-Mobile phone via Symmetry App
-<!---------- end of Equipment Status ------------>
-<!---------------------------------------------->
+//10:54, 23 May 2024 (PDT)
+=====Wafer Bonder, (Suss SB6-8E)=====
+SUSS aims to be on site in early February.  We’ll will send out an email once I get confirmation for a specific date.
+//[[User:Mehalana v|Vraj Mehalana]] 14:23, 13 December 2023 (PST)
+<!--
+SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
+In order for your post to show up correctly, you need to:
+>> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
+>> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
+-->
+<!---------DO NOT EDIT BELOW THIS LINE----------->
 <endfeed />
 <noinclude>[[Category:Templates]]</noinclude>
 <!--------------------------------------------
+====== HOW TO ADD ITEMS ======
-====== HOW TO ADD NEWS ITEMS ======
 * You can copy/paste the example below for a new news item.
 * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way.  (This looks best on the Wiki homepage)
-* You must add a user signature at the end of each post via four tildes: ~~~~. Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
+* You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
 * Use double-slash:   //   at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.
 * Optional: After saving the page, delete the name after the two dashes "--" and delete the "[[(talk)...]]" link.
 * Please use "There are no announcements at this time." if the announcements are empty.
-* URL to the RSS feed via FeedBurner (for Samsung display): http://feeds.feedburner.com/UCSBNanofab-Announcements?format=xml
+* URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&action=feed&feed=rss
-* URL to the RSS feed directly from Wiki: https://www.nanotech.ucsb.edu/wiki/index.php?title=Template:Announcements&action=feed&feed=rss
+* URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&action=feed&feed=rss
@@ Line 76: / Line 70: @@
 ===== NanoFab making LN2 icecream =====
 Tomorrow the NanoFab will be serving liquid nitrogen ice cream.
+// [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)
-// ~~~~
 ************* (end of example) **************
-The ~~~~ will be replaced with your username & timestamp after you submit the post.
+The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username & timestamp after you submit the post.
 ---------------------------------------------->