Template:Announcements: Difference between revisions

Latest revision as of 22:23, 10 February 2025

Lab is OPEN

We completed our work early and the lab is now open for use. -- Tony

//Demis D. John 22:23, 10 February 2025 (UTC)

Olympus DSX Microscope: Down

After speaking with Olympus it looks like there is a problem with the polarizer that is interfering with basic system initialization. I'm waiting for the repair quote and will update everyone when we know more. -- Tony Bosch // Demis D. John 20:41, 5 February 2025 (UTC)

Stepper #3 (ASML DUV) - Maint moved to March 3rd

We have postponed the Periodic Maintenance (PM) to the week of Monday March 3rd. Please plan your work accordingly. // Demis D. John 19:44, 4 February 2025 (UTC)

ICP #2 Maint: Complete

The maintenance is completed and the tool is finishing up an O2 clean run. We are still seeing a 0.04-0.05 Pa actual pressure difference in the software (as before the maint work) which we will address tomorrow, as the tool needs time to reach base pressure. -- Lee Sawyer

//Demis D. John 02:01, 5 February 2025 (UTC)

Oxford ALD+Ion Mill: UP

The tool is useable and in its original condition. If you had a reservation under the previous tool designation it has already been moved over for you.

Chamber 1 is operational and available for use. However, only recipes that run at 300C are to be ran on the tool, as the current thermocouple is only calibrated for that temperature at this time.

Please use the original tool name on SUM to make all future tool reservations.

There is no longer a need for supplemental training. If you have been previously trained on the tool but not received the supplemental training, you can once again reserve and use the tool.

Please feel free to email me directly with any questions you may have.

Thanks Bill Millerski UCSB //Demis D. John 19:48, 4 February 2025 (UTC)

New Gowns: Toolbelts purchases

We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase.

Two vendors for cleanroom belts we are using are listed here, you may request others:

Uniform Technology Tool Belt - note the waist size, the 49” belt fits up to ~36-38” waist.
HiTEC Fannypack

// Demis D. John 03:34, 3 January 2025 (UTC)

Suss SB6-8E

We found a blown resistor (and a questionable op amp) on one of the boards that contains the z-axis motor circuit. However, we still cannot get the tool to initialize. Next we will try swapping out the hard drive again and run some more tests.

I will send out an update once we have one. -Aidan // Demis D. John 00:35, 8 December 2024 (UTC)

ICP1 Down

The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps. //Vraj Mehalana 14:17, 1 March 2024 (PST)

@@ Line 1: / Line 1: @@
 <startfeed />
+=====Lab is OPEN=====
+We completed our work early and the lab is now open for use.
+-- Tony
+//[[User:John_d|Demis D. John]] 22:23, 10 February 2025 (UTC)
-=====ASML Quarterly Maintenance: Mon Feb 10th=====
-We will be performing the Quarterly PM on the ASML next week, Mon Feb 10th, through at least Thurs Feb 13th, possibly into Friday.
-// [[User:John_d|Demis D. John]] 19:44, 4 February 2025 (UTC)
-=====ICP #2 Scheduled Maint next Tuesday 2/4=====
+=====Olympus DSX Microscope: Down=====
+After speaking with Olympus it looks like there is a problem with the polarizer that is interfering with basic system initialization. I'm waiting for the repair quote and will update everyone when we know more.
+-- Tony Bosch
+// [[User:John_d|Demis D. John]] 20:41, 5 February 2025 (UTC)
+=====Stepper #3 (ASML DUV) - Maint moved to March 3rd=====
-ICP#2 will be unavailable a good chunk of the day this coming Tuesday. We will be cleaning the chamber and servicing the throttle valve as we believe it may be the source of the reaction chamber pressure errors (plus it is due for servicing).
+We have postponed the Periodic Maintenance (PM) to the week of Monday March 3rd.
+Please plan your work accordingly.
+// [[User:John_d|Demis D. John]] 19:44, 4 February 2025 (UTC)
+=====ICP #2 Maint: Complete=====
--Lee
+The maintenance is completed and the tool is finishing up an O2 clean run. We are still seeing a  0.04-0.05 Pa actual pressure difference in the software (as before the maint work) which we will address tomorrow, as the tool needs time to reach base pressure. -- Lee Sawyer
-//[[User:Mehalana v|Vraj Mehalana]] 18:54, 31 January 2025 (UTC)
-=====YES - Scheduled Maint=====
+//[[User:John_d|Demis D. John]] 02:01, 5 February 2025 (UTC)
-I will be taking the YES down for a PM on Tuesday beginning at 8 am. Since I will be changing out the throttle valve and swapping in our original generator, this could go into Wednesday. Please plan your processing accordingly.
+=====Oxford ALD+Ion Mill: UP=====
--Lee
+The tool is useable and in its original condition.  If you had a reservation under the previous tool designation it has already been moved over for you.
+Chamber 1 is operational and available for use.  However, only recipes that run at 300C are to be ran on the tool, as the current thermocouple is only calibrated for that temperature at this time.
-//[[User:Mehalana v|Vraj Mehalana]] 17:22, 23 January 2025 (UTC)
+Please use the original tool name on SUM to make all future tool reservations.
-=====Lab is Open=====
+There is no longer a need for supplemental training.  If you have been previously trained on the tool but not received the supplemental training, you can once again reserve and use the tool.
-All suits have been pulled and new suits have been put up. All personal items left behind can be found in the boxes in the lobby.
+Please feel free to email me directly with any questions you may have.
-Please sign up for your hanger spot.
+Thanks
-THE LAB IS NOW OPEN FOR BUSINESS
+Bill Millerski
+UCSB
+//[[User:John_d|Demis D. John]] 19:48, 4 February 2025 (UTC)
+=====New Gowns: Toolbelts purchases=====
-Thank you for your patience during shutdown activities.
+We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for which tool belts you can purchase.
--- [[Peder Lenvik]]
+Two vendors for cleanroom belts we are using are listed here, you may request others:
-// [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)
-=====New Gowns in Jan=====
-We are required to switch to new gowns in January. The new gowns won’t have pockets, but you are allowed to purchase cleanroom tool belts. Please ask staff for tool belts you can use.
-Two vendors for cleanroom belts we are using, you may request others:
 * [https://www.terrauniversal.com/tool-belt-pocket-49in-waist-white-altessa-grid-uniform-technology-4954-60a.html Uniform Technology Tool Belt] - note the waist size, the 49” belt fits up to ~36-38” waist.
 * [https://www.fishersci.com/shop/products/cleanroom-fannypack-1-ea-white/NC0723118?searchHijack=true&searchTerm=cleanroom-fannypack-1-ea-white&searchType=Rapid&matchedCatNo=NC0723118 HiTEC Fannypack]
 // [[User:John_d|Demis D. John]] 03:34, 3 January 2025 (UTC)
-=====KLA P7 Profilometer: Down=====
-The KLA remains down awaiting parts.  This part order has been expedited to the extent possible and should be here in the next few days.
-Thanks
-Bill Millerski
-// [[User:John_d|Demis D. John]] 03:30, 3 January 2025 (UTC)
-=====Oxford ALD+Ion Mill=====
-Unfortunately Chamber 1 is still down for our Oxford Cluster tool.  However we did manage a "work around" to get Chamber 2 and Chamber 3 operational again.  The software is in constant error state which does not affect processing on Chamber 2 and Chamber 3.
-A new tool listing is available in sign up monkey for both these chambers with the word "temporary" or "temp".  For the time being users will have to use these "new" tool listings to reserve time on Chamber 2 and Chamber 3.  Users will have to go through a quick tutorial with me prior to having access to the tool in order to reserve time slots on sign up monkey.  Under NO circumstances are users to use this tool prior to being signed off after being shown how to navigate the software under the current error state.
-Just to reiterate:
-) The tool remains locked out in sign up monkey for the previous tool names
-) There is a new tool designation for Chamber 2 & 3 in sign up monkey"Deposition, ALD, Chamber 3 (Oxford FlexAl) Temporary""Dry Etch, Ion Mill (Oxford Flexal) Temp"
-) Users need a quick tutorial from me prior to getting tool access.
-) Users are not to run the tool until being signed off on the new procedure by staff!  Any user caught using the tool without having the updated tool tutorial sign off, will be subject to suspension.
-) I will be available at any time during my regular scheduled shift to sign users off.  I will be at the tool in the lab for the majority of my work day.
--- Bill Millerski
-//[[User:Mehalana v|Vraj Mehalana]] 23:40, 8 January 2025 (UTC)
-=====Holography/PL: HeCd Laser Down Mon Dec 16th=====
-The 325nm UV Laser will be unavailable from Mon. Dec 16th, through the christmas shutdown, and will be available again soon after Monday Jan 6th.
-We will be installing the refurbished laser which will have higher output power.
-Holography will be unavailable during this time, but all other PL lasers will be available.
-// [[User:John_d|Demis D. John]] 03:28, 3 January 2025 (UTC)
 =====Suss SB6-8E=====

Template:Announcements: Difference between revisions

Latest revision as of 22:23, 10 February 2025

Contents

Lab is OPEN

Olympus DSX Microscope: Down

Stepper #3 (ASML DUV) - Maint moved to March 3rd

ICP #2 Maint: Complete

Oxford ALD+Ion Mill: UP

New Gowns: Toolbelts purchases

Suss SB6-8E

ICP1 Down

Navigation menu

Template:Announcements: Difference between revisions

Latest revision as of 22:23, 10 February 2025

Lab is OPEN

Olympus DSX Microscope: Down

Stepper #3 (ASML DUV) - Maint moved to March 3rd

ICP #2 Maint: Complete

Oxford ALD+Ion Mill: UP

New Gowns: Toolbelts purchases

Suss SB6-8E

ICP1 Down

Navigation menu

Search