Probe Station & Curve Tracer: Difference between revisions
Jump to navigation
Jump to search
(→Equipment Specifications: deleted HP ParamAnalyzer) |
|||
| Line 18: | Line 18: | ||
*Tektronix 370A computer controlled curve tracer |
*Tektronix 370A computer controlled curve tracer |
||
*Pulsed and DC characterization of 2 and 3 terminal devices in clean environment |
*Pulsed and DC characterization of 2 and 3 terminal devices in clean environment |
||
*Keithley 42xx Source-Meter unit |
|||
*HP 4145 parametric semiconductor analyzer |
|||
**Current/Voltage/Resistance readbacks, along with 4-point-probe measurements. |
|||
*Windows PC with: |
|||
**Labview |
|||
**Python(x,y) |
|||
***I-V Curve Plotting script with Keithley 42xx |
|||
**Matlab |
|||
***I-V Curve Plotting script with Keithley 42xx |
|||
Revision as of 06:18, 11 October 2018
|
About
The probe station in the cleanroom is set up for up to four-point probing of two terminal and three terminal devices. The probe station is a Signatone station with a 2” diameter vacuum chuck. Four probes are provided. The measurements are taken with an HP xxxx 4-point probe measuring system or on a Tektronix 370A programmable curve tracer. The curve tracer can be controlled by a computer to get portable data. FETs, HBTs, diodes, and contact resistance measurements are typically done on this system. The 370A curve tracer is capable of pulsed and DC operation.
Equipment Specifications
- 4 probe station
- HP xxxx 4-point resistance meter
- Tektronix 370A computer controlled curve tracer
- Pulsed and DC characterization of 2 and 3 terminal devices in clean environment
- Keithley 42xx Source-Meter unit
- Current/Voltage/Resistance readbacks, along with 4-point-probe measurements.
- Windows PC with:
- Labview
- Python(x,y)
- I-V Curve Plotting script with Keithley 42xx
- Matlab
- I-V Curve Plotting script with Keithley 42xx