Calculators + Utilities: Difference between revisions

From UCSB Nanofab Wiki
Jump to navigation Jump to search
(→‎General Calculators: added Python Scripts section)
m (→‎Python Scripts: updated description. for Keithely IV-Sweep)
Line 35: Line 35:


=== Python Scripts ===
=== Python Scripts ===
* [[Keithley I-V Sweep]]: Sweep voltage and plot current vs. voltage using a Keithley SMU
* [[Keithley I-V Sweep]]: Sweep voltage and plot current vs. voltage using a Keithley SMU. Already installed at the Probe Station in Bay 4 (Use '''''Python(X,Y)''''' to run), and on the QFI Thermal Microscope.
* [[QFIScope Thermal Analysis]]: Import 2D temperature data from the [[IR Thermal Microscope (QFI)]] and plot temperature profiles at specified locations.
* [[QFIScope Thermal Analysis]]: Import 2D temperature data from the [[IR Thermal Microscope (QFI)]] and plot temperature profiles at specified locations.
* [[Laser Etch Monitor Simulation in Python]]: Simulate your laser endpoint signal as you dry-etch through a stack of thin-film layers.
* [[Laser Etch Monitor Simulation in Python]]: Simulate your laser endpoint signal as you dry-etch through a stack of thin-film layers.

Revision as of 15:22, 9 November 2017

This page lists a few online calculators that are useful to lab users.

Fabrication Processes & Converters

Refractive Indices

Material Parameters

Wet Etching

General Calculators

  • Anaconda Python
    • A full Matlab-like IDE and GUI, using the Python language. The Spyder interface is modeled after Matlab.
    • Includes the scientific Python libraries needed for array math (numpy), plotting (matplotlib), data science (pandas) and many others.

Python Scripts