Calculators + Utilities

This page lists a few online calculators and utilities that are useful to lab users.

Fabrication Processes & Converters

• Thermal Oxide Calculator (BYU)
• Conversion of Pressure Units (calculatoredge.com)
• Mean Free Path tables (Pfeiffer Vacuum)

Material Parameters

• WebElements: Compounds
  • Boiling points of various compounds can tell you how volatile an etch product may be in a reactive ion etch, or whether they need to be wet-etched instead.
• Physical Properties of Semiconductors (Ioffe Institute)

Wet Etching

• Transene Inc. Chemical Compatibility Chart
• A.R. Clawson, "Guide to references on III±V semiconductor chemical etching", 2001
  • Enormous review of published wet etches of many semiconductors and alloys. The only thing it's missing is a hyperlinked table of contents.

Refractive Indices

• LuxPop.com
• RefractiveIndex.info
• Filmetrics Inc.
• Ioffe Institute
• nk.py (Demis D. John)
  • Python functions for returning n (ref. idx.) & k (ext. coeff.) of various NanoFab thin-films at a specified wavelength (dispersion models).

General Calculators

• Anaconda Python
  • A free Matlab-like IDE and GUI, using the Python language. The Spyder interface is modeled after Matlab.
  • Includes the scientific Python libraries needed for array math (numpy), plotting (matplotlib), data science (pandas) and many others. Many open-source packages are available to extend capabilities.

• Octave Online Interpreter (online-utility.org)
  • A Matlab-like command-line interface, powered by Python Octave.

• Wolfram Alpha
  • A versatile online interpreter/calculator, allowing calculations such as "Volume of 1.5g of Silicon", "melting point of SiO2" or "520°C in Fahrenheit".

Scripts + Programs

Python Scripts

These scripts are best run in the Spyder IDE, which is easily installed via Anaconda, Python(X,Y), or direct compiling using a command-line package manager.

• Keithley I-V Sweep
  • Sweep voltage and plot current vs. voltage using a Keithley SMU.
  • Already installed at the Probe Station in Bay 4, and on the QFI Thermal Microscope (Use Python(X,Y) to run).
  • Requires the pyvisa python module.
• QFIScope Thermal Analysis
  • Import 2D temperature data from the IR Thermal Microscope (QFI) and plot temperature profiles at user-specified locations.
  • Already installed on the QFI Infrared Microscope.
• Laser Etch Monitor Simulation in Python
  • Simulate your laser endpoint signal as you dry-etch through a stack of thin-film layers.