Process Group - Lab Stocking/Supplies Tasks

From UCSB Nanofab Wiki
Revision as of 18:08, 30 January 2021 by John d (talk | contribs) (Update: not needed.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search 
UPDATE: 2021-01: PrcGrp not needed to do these tasks any more

Morning Shift

Biljana

Biljana: Mon–Fri:

  • (any time, although on Monday preferably at start of shift)
  • check & replenish wire rack for gloves racks, wipes, tins, etc. in Bay 5,6,7

Demis

Demis: Thurs, Fri: check & replenish wire racks in bays 1,2,3,4

  • Look in Supplies corridor

Demis: Mon,Tues,Wed: 12:30p:

  • check & take out bay 5,6,7 solvent/PR bench trash, developer bottles.
    • HazMat Bags (Yellow) are on Luis' cart
    • Be Careful!  Watch out for sharps etc - wear thick gloves if necessary
    • Tie up the bags, place in Chase 5 PR-waste cabinet
    • Check Acid/bases.  Ok to skip if waste bottle shelf is not full.  Look for missing/low acid bottles.  Wear Acid gloves to service, use cart and be careful!
    • Refill Solvents (Bay6) cabinets

Bill

Bill: Thurs,Fri: 12:30p–1pm:

  • check & take out bay 5,6,7 solvent/PR bench trash, developer bottles.

(Bill Can check on Weekend.)

  • HazMat Bags (Yellow) are on Luis' cart
  • Be Careful!  Watch out for sharps etc - wear thick gloves if necessary
  • Tie up the bags, place in Chase 5 PR-waste cabinet
  • Check Acid/bases.  Ok to skip if waste bottle shelf is not full.  Look for missing/low acid bottles.  Wear Acid gloves to service, use cart and be careful!
  • Refill Solvents (Bay6)  cabinets

Evening Shift

Dan

DanR: check & replenish wire racks in bays 5,6,7

  • Look in Supplies corridor

Dan: Wed: Check & replenish wire rack in bays 1,2,3,4

DanR: Wed, Fri @ end of shift.: take out solvent/PR trashes & check developer,solvent,acid bottle Empties

  • HazMat Bags (Yellow) are on Luis' cart
  • Be Careful!  Watch out for sharps etc - wear thick gloves if necessary
  • Tie up the bags, place in Chase 5 PR-waste cabinet
  • Check Acid/bases.  Ok to skip if waste bottle shelf is not full.  Look for missing/low acid bottles.  Wear Acid gloves to service, use cart and be careful!
  • Refill Acid/base (Bay5) cabinets
    • Wear Apron/Gloves, ok to wear while pushing cart (usually no aprons outside acid bays).

Ning

Ning: Mon, Tues: : Check & replenish wire rack in bays 1,2,3,4

Ning: Mon, Tues and Thurs; near end of shift: take out solvent/PR trashes  & check developer,solvent,acid bottle Empties

  • HazMat Bags (Yellow) are on Luis' cart
  • Be Careful!  Watch out for sharps etc - wear thick gloves if necessary
  • Tie up the bags, place in Chase 5 PR-waste cabinet
  • Check Acid/bases.  Ok to skip if waste bottle shelf is not full.  Look for missing/low acid bottles.  Wear Acid gloves to service, use cart and be careful!
  • Refill Acid/base (Bay5) cabinets
    • Wear Apron/Gloves, ok to wear while pushing cart (usually no aprons outside acid bays).
Retrieved from "https://wiki.nanofab.ucsb.edu/w/index.php?title=Process_Group_-_Lab_Stocking/Supplies_Tasks&oldid=158721"