Goniometer (Rame-Hart A-100) - Operating Procedure

From UCSB Nanofab Wiki
Revision as of 16:20, 27 July 2020 by John d (talk | contribs) (initial page, mostly copied from "NRL Contact Angle Goniometer - Owners Manual.pdf")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

System Illustration

labeled photo of the contact angle goniometer
The Ramé-Hart A-100 Contact Angle Goniometer and relevant adjustment knobs.

Measurement Procedure

To measure the contact angle of water on a surface, perform the following procedure.

  • Note that the image through the scope is inverted upside-down.
  • You will also see a reflection of the water droplet on your polished substrates, as illustrated here:
Illustration of a reflective sample.
Illustration of a reflective sample. Substrate is on top due to inverted image.

Goniometer (Rame-Hart A-100) - Steps for Measuring v1.png

Retrieved from "https://wiki.nanofab.ucsb.edu/w/index.php?title=Goniometer_(Rame-Hart_A-100)_-_Operating_Procedure&oldid=158309"