Nanofab Staff Internal Pages

Pages intended for NanoFab Staff, internal.

Equipment Group

• Video Training Procedures - How to record, edit and publish a video training.

Process Group

• Job Tracking - pages to organize and track our remote 'fab service jobs
• Billing Instructions (RechargeApp) - info on entering billing into RechargeApp.
  • Includes Supplies Costs.
• ASML Dicing Guide Programming - how to print dicing guides on a wafer
• Process Control Data - all the links to process calibration/repeatability data in one place.

NanoFab IT

Computers, Networks, FTP/File-Sync etc.

• Instructions+Procedures can be found in gDrive > Facilities Group > Computer Systems
• Unifi Network SDN
  1. Network Hardware Maintenance
     1. Add/Remover User for Unifi Network Controller
  2. Switch Maintenance
     1. Restart
     2. Reset
  3. Add/Replace new Switch visit store.ui.com/us/en we are using follow switch below
     1. switching-standard 48/24/16 ports
     2. switching-aggregation 8 Ports
     3. Flex Mini 5 Ports
  4. Add/ Replace Fail SFP Receiver When searching in the Maintenance Shop, locate the bin labeled SFP Receiver & look for 1000 BASE-LX 1310-nm SFP Receiver
  5. Add/ Replace Fail Fiber Cable When searching in the Maintenance Shop, locate the bin labeled Fiber LC to SC and search for the Optical Fiber Patch Cable.
  6. Add/Replace the Ethernet patch We have four length of the patch cable 3/5/10/15 ft located in the Tel/Data RM#1117 In both case please update the IT Hardware Log Sheet: Eth Ports, Endpoints
     1. Patch Pannel to Switch Label format : <<sw-name>>-<<port-number>>
     2. System to Wall Port Lable format : Nanofile-Network 10.1.1.1/16
• Synology
  1. Active Backup for Business
     1. Add new device
     2. Add new server
     3. Restore a device
  2. Create a new Network Share Folder
  3. Add a Device to Apple Time Machine
  4. Server Maintenance
• Nanofiles
  1. Failover (CARP)
  2. Restart
  3. Restore
  4. Add Device to Network
  5. Nanofile Sync
     1. Add a new Device
     2. Replace a Device
  6. Generating New WireGard VPN Credentials
     1. Server-Side
        1. Commend for generating the keys cd /etc/wireguard wg genkey | tee privatekey_<<replace it with username>> | wg pubkey > publickey_<<replace it with username>>
        2. Add a new line in /etc/hostname.wg0 PublicKey = <<public_key_of_new_user>> AllowedIPs = 10.1.10.XXX/32
        3. Service Restart sh /etc/netstart wg0
     2. Client-Side
        1. Generate the a new file with .conf extension [Interface] Address = 10.1.10.XXX/32 DNS = 10.1.1.1 PrivateKey = <<privatekey_of_new_user>>
           [Peer] PublicKey = hHngYmJZUxRfLAmCxhC00m80hjsNDKl4LKV4iDYN+TY= Endpoint = nanofiles1.ece.ucsb.edu:5900 AllowedIPs = 10.1.0.0/16 PersistentKeepalive = 25
• Signupmonkey
  • Failover
  • Restart
  • Restore
• RechargeApp
  • Failover
  • Restart
  • Restore
• Nanofabserver2
  • Restart
  • Restore
• NanoFab Wiki
  • Restart
  • Restore
• NanoFab Server UPS
  • Battery Test
• Utilities Software
  1. LogMeIn
     1. Add a new Device
     2. Add a new user
     3. Remove a External/Internal User
        

Useful UCSB Pages

• Facilities Work Requests - Here's where you report facilities repair requests, like replacing light bulbs, building problems (doors, elevators) etc.

Old / Defunct

Old pages we don't use on the Wiki anymore, but are kept for possible utility later on.

• Lab Stocking/Supplies Tasks - Not needed anymore 2021-02
• Old Deposition Data - 2021-12-15 - removed from main Dep pages
  • New Deposition Data - NastaziaM 2021-11-22 - combo of old & new links. Can probably be safely deleted.
  • Deposition Data - temporary 2021-12-15 - staging for new links, copied to PECVD/Sputter Recipes pages on 2021-12-15. This can probably be safely deleted.