Difference between revisions of "Nanofab Staff Internal Pages"
Jump to navigation
Jump to search
Mehalana v (talk | contribs) |
Mehalana v (talk | contribs) (Removing IT: In pprogess...) |
||
Line 16: | Line 16: | ||
''Computers, Networks, FTP/File-Sync etc.'' |
''Computers, Networks, FTP/File-Sync etc.'' |
||
− | *Instructions+Procedures can be found in '' |
+ | *Instructions+Procedures can be found in ''GDrive Share Drive [https://drive.google.com/drive/u/0/folders/0AAqKJ7erJXTnUk9PVA NanoFab IT]'' |
− | *'''Unifi Network SDN''' |
||
− | *#Network Hardware Maintenance |
||
− | *##Add/Remover User for Unifi Network Controller |
||
− | *#Switch Maintenance |
||
− | *##Restart |
||
− | *##Reset |
||
− | *#Add/Replace new Switch visit [https://store.ui.com/us/en store.ui.com/us/en] we are using follow switch below |
||
− | *##switching-standard 48/24/16 ports |
||
− | *##switching-aggregation 8 Ports |
||
− | *##Flex Mini 5 Ports |
||
− | *#Add/ Replace Fail SFP Receiver When searching in the Maintenance Shop, locate the bin labeled SFP Receiver & look for 1000 BASE-LX 1310-nm SFP Receiver |
||
− | *#Add/ Replace Fail Fiber Cable When searching in the Maintenance Shop, locate the bin labeled Fiber LC to SC and search for the Optical Fiber Patch Cable. |
||
− | *#Add/Replace the Ethernet patch We have four length of the patch cable 3/5/10/15 ft located in the Tel/Data RM#1117 In both case please update the [https://docs.google.com/spreadsheets/d/1iPc4Sxh8ge2mc0hhXlqS6ofckT8nzfrw9QcWefoLMa8/edit?usp=sharing IT Hardware Log] Sheet: '''Eth Ports''', '''Endpoints''' |
||
− | *##Patch Pannel to Switch Label format : <<sw-name>>-<<port-number>> |
||
− | *##System to Wall Port Lable format : Nanofile-Network 10.1.1.1/16 |
||
− | *'''Synology''' |
||
− | *#Active Backup for Business |
||
− | *##Add new device |
||
− | *##Add new server |
||
− | *##Restore a device |
||
− | *#Create a new Network Share Folder |
||
− | *#Add a Device to Apple Time Machine |
||
− | *#Server Maintenance |
||
− | *'''Nanofiles''' |
||
− | *#Failover (CARP) |
||
− | *#Restart |
||
− | *#Restore |
||
− | *#[[Nanofab-IT - Add Device to Network|Add Device to Network]] |
||
− | *#Nanofile Sync |
||
− | *##Add a new Device |
||
− | *###Make sure Device is connected to Nanofiles |
||
− | *###Connect the Network drive \\nanofiles\staff |
||
− | *###Copy '''grsync''' directory from the network and paste it to '''c:\''' drive |
||
− | *###Run the '''Init.bat''' in the grsync directory, press enter twice (make sure do not enter any password) besides remember the part of the stored SSH key |
||
− | *###open the sync.bat in notepad change |
||
− | *####'''<code>SET MACHINE=[host-name]</code>''' |
||
− | *####create a nanofiles - userdata directory in public folder Note : In case of Drive change use this syntax '''<code>/cygdrive/[drive-letter]/</code>''' |
||
− | *##Replace a Device |
||
− | *#Generating New WireGard VPN Credentials |
||
− | *##Server-Side |
||
− | *###Commend for generating the keys: <code>cd /etc/wiregard</code> <code>wg genkey | tee privatekey_<<replace it with username>> | wg pubkey > publickey_<<replace it with username>></code> |
||
− | *###Add a new line in /etc/hostname.wg0: <code>wgpeer <<public_key_of_new_user>> wgaip 10.1.10.XXX/32</code> |
||
− | *###Service Restart: <code>sh /etc/netstart wg0</code> |
||
− | *##Client-Side |
||
− | *###'''Generate the a new file with .conf extension''' <code>[Interface]</code> <code>PrivateKey = <<privatekey_of_new_user>></code> <code>Address = 10.1.10.XXX/32</code> <code>DNS = 10.1.1.1</code> <code>[Peer]</code> <code>PublicKey = hHngYmJZUxRfLAmCxhC00m80hjsNDKl4LKV4iDYN+TY= </code> <code>AllowedIPs = 10.1.0.0/16</code> <code>Endpoint = nanofiles1.ece.ucsb.edu:5900</code> <code>PersistentKeepalive = 25</code> |
||
*'''Signupmonkey''' |
*'''Signupmonkey''' |
||
Line 74: | Line 29: | ||
**Restart |
**Restart |
||
**Restore |
**Restore |
||
− | *'''DataGrove''' |
||
− | **Restore Backup |
||
− | **#Login to nanofiles2 |
||
− | **#Get the list of the Snapshots: <code>restic -p /etc/restic-pwd --repo sftp:restic@datagrove:/srv/backup snapshots</code> |
||
− | **#To view files within a snapshot: <code>restic -p /etc/restic-pwd --repo sftp:restic@datagrove:/srv/backup ls -l [snapshort-id] | grep "[dir-path-to-search]"</code> |
||
− | **#To restore a single directory: <code>restic -p /etc/restic-pwd --repo sftp:restic@datagrove:/srv/backup restore [snapshort-id] --target [dir-path-save-restore-data] --include [dir-path-to-restore]</code> |
||
− | **Note: Please replace all value in [square-bracket] as mention |
||
*'''NanoFab Wiki''' |
*'''NanoFab Wiki''' |
||
**Restart |
**Restart |
||
**Restore |
**Restore |
||
*'''NanoFab Server UPS''' |
*'''NanoFab Server UPS''' |
||
− | **Battery Test |
+ | **Battery Test<br /> |
− | *'''Utilities Software''' |
||
− | *#LogMeIn |
||
− | *##Add a new Device |
||
− | *##Add a new user |
||
− | *##Remove a External/Internal User <br /> |
||
==Administration== |
==Administration== |
Latest revision as of 16:10, 9 April 2024
This page is intended for NanoFab Staff, internal.
Equipment Group
- Video Training Procedures - How to record, edit and publish a video training.
Process Group
- Job Tracking - pages to organize and track our remote 'fab service jobs
- Billing Instructions (RechargeApp) - info on entering billing into RechargeApp.
- Includes Supplies Costs.
- ASML Dicing Guide Programming - how to print dicing guides on a wafer
- Process Control Data - all the links to process calibration/repeatability data in one place.
NanoFab IT
Computers, Networks, FTP/File-Sync etc.
- Instructions+Procedures can be found in GDrive Share Drive NanoFab IT
- Signupmonkey
- Failover
- Restart
- Restore
- RechargeApp
- Failover
- Restart
- Restore
- Nanofabserver2
- Restart
- Restore
- NanoFab Wiki
- Restart
- Restore
- NanoFab Server UPS
- Battery Test
- Battery Test
Administration
- Nanofab New User Onboarding - UCSB Users - To-do list for new internal-UCSB users
- Nanofab New User Onboarding - External Users - To-do list for new External users traveling from elsewhere
Useful UCSB Pages
- Facilities Work Requests - Here's where you report facilities repair requests, like replacing light bulbs, building problems (doors, elevators) etc.
Old / Defunct
Old pages we don't use on the Wiki anymore, but are kept for possible utility later on.
- Lab Stocking/Supplies Tasks - Not needed anymore 2021-02
- Old Deposition Data - 2021-12-15 - removed from main Dep pages
- New Deposition Data - NastaziaM 2021-11-22 - combo of old & new links. Can probably be safely deleted.
- Deposition Data - temporary 2021-12-15 - staging for new links, copied to PECVD/Sputter Recipes pages on 2021-12-15. This can probably be safely deleted.