ASML DUV: Edge Bead Removal via Photolithography: Difference between revisions

From UCSB Nanofab Wiki
Jump to navigation Jump to search
(credits and date)
No edit summary
 
Line 3: Line 3:
It loses a bit more device area, but significantly lowers the risk of breaking a wafer in clamped systems such as the DSEiii.
It loses a bit more device area, but significantly lowers the risk of breaking a wafer in clamped systems such as the DSEiii.


(This process can easily be transferred to I-Line photoresists, using the [[Contact Aligner (SUSS MA-6)|Suss MA-6]] for flood exposure.)
(This process can easily be transferred to I-Line photoresists, using the [[Contact Aligner (SUSS MA-6)|Suss MA-6]] for flood exposure instead of DUV Flood expose.)

⚫
===Photo-EBR Process===

⚫
*Spun/cure a DUV photoresist using your standard photolith. params (for example [[Stepper Recipes#Positive Resist .28ASML DUV.29|UV6]]).
⚫
*Place the wafer on the [[DUV Flood Expose|'''DUV Flood Exposer''']] with the metal mask in place.  
⚫
*Turn on rotation on slow (so mask doesn't move), lamp warmup is not required.
⚫
*Expose for 13 sec, with slow rotation.
⚫
*''Optionally:'' PEB 135°C, 60sec, Develop, dry (in SRD), then proceed.  This did not affect my primary lithography when I did this step separately.  I've also done photo-EBR where I combined this EBR exposure with the primary Imaging litho. and only did a single develop.
⚫
*Load wafer into ASML & Expose your process
⚫
*PEB 135°C, 90sec
⚫
*300MiF develop as per your normal process.
⚫
**(If you did not develop the EBR yet, it should go away in this step.)


⚫
=== Photo-EBR Process ===
⚫
* Spun/cure a DUV photoresist using your standard photolith. params (for example [[Stepper Recipes#Positive Resist .28ASML DUV.29|UV6]]).
⚫
* Place the wafer on the [[DUV Flood Expose|DUV Flood Exposer]] with the metal mask in place.  
⚫
* Turn on rotation on slow (so mask doesn't move), lamp warmup is not required.
⚫
* Expose for 13 sec, with slow rotation.
⚫
* ''Optionally:'' PEB 135°C, 60sec, Develop, dry (in SRD), then proceed.  This did not affect my primary lithography when I did this step separately.  I've also done photo-EBR where I combined this develop with the primary litho.
⚫
* Load wafer into ASML & Expose your process
⚫
* PEB 135°C, 90sec
⚫
* 300MiF develop as per your normal process.
⚫
** (If you did not develop the EBR yet, it should go away in this step.
Demis D. John, 2018-10-22
Demis D. John, 2018-10-22

Latest revision as of 06:06, 5 October 2022

The metal edge-bead removal masks are in the Suss MA-6 Contact Aligner drawers, and I recommend the "4mm recessed".

It loses a bit more device area, but significantly lowers the risk of breaking a wafer in clamped systems such as the DSEiii.

(This process can easily be transferred to I-Line photoresists, using the Suss MA-6 for flood exposure instead of DUV Flood expose.)

Photo-EBR Process

  • Spun/cure a DUV photoresist using your standard photolith. params (for example UV6).
  • Place the wafer on the DUV Flood Exposer with the metal mask in place.  
  • Turn on rotation on slow (so mask doesn't move), lamp warmup is not required.
  • Expose for 13 sec, with slow rotation.
  • Optionally: PEB 135°C, 60sec, Develop, dry (in SRD), then proceed.  This did not affect my primary lithography when I did this step separately.  I've also done photo-EBR where I combined this EBR exposure with the primary Imaging litho. and only did a single develop.
  • Load wafer into ASML & Expose your process
  • PEB 135°C, 90sec
  • 300MiF develop as per your normal process.
    • (If you did not develop the EBR yet, it should go away in this step.)
Demis D. John, 2018-10-22
Retrieved from "https://wiki.nanofab.ucsb.edu/w/index.php?title=ASML_DUV:_Edge_Bead_Removal_via_Photolithography&oldid=160544"