Resistivity Mapper (CDE RESMAP)

From UCSB Nanofab Wiki
Revision as of 22:07, 30 October 2023 by Millerski w (talk | contribs) (Updated SOP)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Resistivity Mapper (CDE RESMAP)
CDEResmap.jpg
Location Bay ?
Tool Type Inspection, Test and Characterization
Manufacturer Creative Design Engineering
Description CDE Resmap 4 Point Resistivity Mapper
Primary Supervisor Bill Millerski
(805) 893-2655
wmillerski@ucsb.edu

Secondary Supervisor

Tony Bosch

Recipes


About

The CDE Resmap 4 point resistivity mapper is used for measuring resistivity across the wafer for substrates and thin films deposited in the facility. The system can do automated resistivity mapping for pieces to 8 inch wafers.

The resistivity range is 2 mOhm/Square to 5 MOhm/square. Contour plots, 3D plots, histograms, data exporting are supported from the Windows XP based control system.

Instructions

Retrieved from "https://wiki.nanofab.ucsb.edu/w/index.php?title=Resistivity_Mapper_(CDE_RESMAP)&oldid=161446"