Stepper 3 (ASML DUV)

Stepper 3 (ASML DUV) Tool Type Lithography Location Bay 3 Supervisor Brian Thibeault Supervisor Phone (805) 893-2268 Supervisor E-Mail thibeault@ece.ucsb.edu Description ASML PAS 5500/300 DUV Stepper Manufacturer ASML Sign up for this tool

About

The ASML 5500 stepper is a 248nm DUV stepper for imaging dense features down to below 200nm and isolated line structures down to below 150nm. The full field useable exposure area is limited to the intersection of a 31mm diameter circle and a rectangle of dimensions 22mm x 27mm. The system has a variable NA system and has a square field image size of 21 x 21mm for 0.63 NA and a square field image size of 22mm x 22mm for 0.4 to 0.57 NA. Other rectangular sizes available: 21mm x 23mm; 20mm x 24mm; 19mm x 25mm; 18mm x 25.5mm; 17mm x 26mm; 16mm x 26.5mm; 15mm x 27mm. Overlay accuracy is better than 30nm. The system is configured for 4” wafers and, with staff support, mounted pieces down to 14mm in size can be exposed using a 4” wafer as a carrier.

Resists Used:

• UV210-0.3 - Positive: 300nm nominal thickness
• UV6-0.8 - Positive: 800nm nominal thickness
• UV26-2.5 - Positive: 2.5um nominal thickness
• UVN2300-0.5 - Negative: 500nm nominal thickness

• AR2/DUV42P-6/DS-K101: Anti-Reflective Coatings
• PMGI: Underlayer

AZ300MIF Developer for all processes

Process Information

• Process Page

Service Provider

• ASML

Operating Procedures

• Job Programming - Full
• Job Programming- Simplified -Full Wafers
• Mask Making Guidelines