Difference between revisions of "Template:Announcements"

Latest revision as of 13:42, 9 May 2024

Atomic Force Microscope (Dimension ICON) - 05/08: AFM Head needs repair

I will have to take the AFM head unit back to Bruker for repair. The height sensor failed all the tests I tried so the Z-piezo/strain gauge unit will most likely need to be replaced. SO for the foreseeable future, the AFM is down.--Demis

//Vraj Mehalana 13:42, 9 May 2024 (PDT)

MA6 TSA is down - Update

Still waiting on a quote and lead time for the board we need for the TSA microscope issue, was supposed to have that info yesterday. I've just pinged them and will provide everyone with an update once I have something.

//Vraj Mehalana 11:15, 1 May 2024 (PDT)

Velion FIB Tool DOWN

Raith service are installing and aligning a new GaBiLi source. The Velion FIB column is not available to users until further notice.

//Vraj Mehalana 10:58, 30 April 2024 (PDT)

ASML optics replacement May 20th-22nd

We will be performing beam delivery optics replacement on Mon May 20th to 22nd, to resolve a low intensity reading. The tool will be unavailable during this time.e.

//Vraj Mehalana 09:40, 9 May 2024 (PDT)

ICP1 Down

The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps. //Vraj Mehalana 14:17, 1 March 2024 (PST)

Lab Access Changes: Symmetry App

Card/Iris scanner access is still currently enabled. However we will be moving to a smartphone-based access system. IMPORTANT: check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled "Invitation to Access Symmetry App". // John d 13:49, 7 November 2023 (PST)

Wafer Bonder, (Suss SB6-8E)

SUSS aims to be on site in early February. We’ll will send out an email once I get confirmation for a specific date. //Vraj Mehalana 14:23, 13 December 2023 (PST)

@@ Line 1: / Line 1: @@
 <startfeed />
+=====Atomic Force Microscope (Dimension ICON) - 05/08: AFM Head needs repair=====
-<!--feedBurner name="UCSBNanofab-Announcements" /-->
+I will have to take the AFM head unit back to Bruker for repair. The height sensor failed all the tests I tried so the Z-piezo/strain gauge unit will most likely need to be replaced.  SO for the foreseeable future, the AFM is down.--Demis
-<!-- Description of the RSS feed -->
-'''''Equipment Status'''''
-----
-<!--
-SEE THE BOTTOM OF THIS PAGE FOR INSTRUCTIONS ON ADDING NEWS ITEMS.
+//[[User:Mehalana v|Vraj Mehalana]] 13:42, 9 May 2024 (PDT)
-Please use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
+=====MA6 TSA is down - Update=====
--->
+Still waiting on a quote and lead time for the board we need for the TSA microscope issue, was supposed to have that info yesterday. I've just pinged them and will provide everyone with an update once I have something.
-<!---------------------------------------------->
-<!------------- Equipment Status ---------------->
+//[[User:Mehalana v|Vraj Mehalana]] 11:15, 1 May 2024 (PDT)
-===== January Autostep Service =====
+=====Velion FIB Tool DOWN=====
-The vendor will be here to service the Autostep starting January 18, 2021. The service is expected to go through Thursday January 21st.
+Raith service are installing and aligning a new GaBiLi source. The Velion FIB column is not available to users until further notice.
-[[User:Silva|Silva]] 08:20, 8 January 2021 (PST)
+//[[User:Mehalana v|Vraj Mehalana]] 10:58, 30 April 2024 (PDT)
-===== January GCA 6300 Service =====
-The vendor will be servicing the GCA 6300 on Thursday January 21,2021. The system will be available for your use later that afternoon.
-[[User:Silva|Silva]] 08:20, 8 January 2021 (PST)
-===== MLA150: Maintenance on Thurs Jan 7th =====
+=====ASML optics replacement May 20th-22nd=====
+We will be performing beam delivery optics replacement on Mon May 20th to 22nd, to resolve a low intensity reading. The tool will be unavailable during this time.e.
-The Heidelberg MLA 150 will be closed for remote maintenance by HIMT, on Thurs Jan 6th.
-// [[User:John d|John d]] 08:11, 6 January 2021 (PST)
+//[[User:Mehalana v|Vraj Mehalana]] 09:40, 9 May 2024 (PDT)
-===== Weekly Testing strongly urged for UCSB Students/Staff =====
-Free weekly COVID testing is available to UCSB Staff, Faculty and Students. UCSB employees are strongly urged to sign up for weekly testing, which takes only minutes, is administered on-campus and is free of charge.
+=====ICP1 Down=====
-Weekly recurring appointments can be made as follows:
+The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.
-* Log on to the [https://studenthealthoc.sa.ucsb.edu/login_dualauthentication.aspx '''UCSB Testing Patient Portal'''] using your UCSB NetID and password.
+//[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)
-* Select “''Appointments''” and then select “''COVID-19 Services''.”
-* Select “''I need to schedule my weekly COVID-19 testing''” and answer the questions.
-* Select an available date and time and click “''Continue''.”
-* Confirm your appointment date and time and then click “''Schedule''.”
-** Note: You must click “''Schedule''” or your appointment will not be confirmed. Also, be sure to add the appointment time and location to your calendar.
+=====Lab Access Changes: Symmetry App=====
-The Chancellor's [https://chancellor.ucsb.edu/memos/2020-10-15-recommended-covid-19-asymptomatic-campus-testing-program-faculty-staff-and memo to campus with details can be found here].
+Card/Iris scanner access is still currently enabled.  However we will be moving to a smartphone-based access system.  '''IMPORTANT''': check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled '''''"Invitation to Access Symmetry App"'''''.
-// [[User:John d|John d]] 06:20, 16 November 2020 (PST)
+// [[User:John d|John d]] 13:49, 7 November 2023 (PST)
-===== UCSB Flu Vaccination Mandate =====
+=====Wafer Bonder, (Suss SB6-8E)=====
+SUSS aims to be on site in early February.  We’ll will send out an email once I get confirmation for a specific date.
-UCSB Students, Staff and Faculty are required to recieve a Flu Vaccine by Nov. 1st. <br>Please see the '''[[COVID-19_User_Policies#UCSB_Flu_Vaccination_Mandate|COVID19 Page]]''' for relevant links and information.
-// [[User:John d|John d]] 19:47, 13 October 2020 (PDT)
+//[[User:Mehalana v|Vraj Mehalana]] 14:23, 13 December 2023 (PST)
+<!--
-===== NanoFab COVID Protocols =====
+SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
-Following guidelines provided by our Office of Research, the UCSB Nanofabrication Facility is open only for limited/authorized use for critical activity at this time.
+In order for your post to show up correctly, you need to:
+>> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
-Contact the [[Brian Thibeault|Lab Director]] for more information.
+>> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
+-->
-''The most recent COVID Protocols can be found at '''[[COVID-19_User_Policies]]'''.''
+<!---------DO NOT EDIT BELOW THIS LINE----------->
-// [[User:John d|John d]] 15:00, 19 July 2020 (PDT)
-===== New Tool Installations =====
-See the [https://wiki.nanotech.ucsb.edu/w/index.php/Main_Page#mp-trivia-h2 News Feed] for info on two upcoming tool installations!
-The [https://www.raith.com/products/velion.html?mobile=0 Raith Velion FIB] is up and running, and [[Dan_Read|Dr. Dan Read]] is qualifying the tool.  See the [[Focused_Ion-Beam_Lithography_(Raith_Velion)|Velion's Tool page here]].
-The Heidelberg Maskless Aligner has been installed, and is in the process of being qualified/characterized.  See the [[Maskless_Aligner_(Heidelberg_MLA150)|MLA150's tool page here]].
-// [[User:John d|John d]] 09:10, 18 July 2020 (PDT)
-<!---------- end of Equipment Status ------------>
-<!---------------------------------------------->
 <endfeed />
 <noinclude>[[Category:Templates]]</noinclude>
 <!--------------------------------------------
+====== HOW TO ADD ITEMS ======
-====== HOW TO ADD NEWS ITEMS ======
 * You can copy/paste the example below for a new news item.
 * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way.  (This looks best on the Wiki homepage)
-* You must add a user signature at the end of each post via four tildes: ~~~~. Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
+* You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
 * Use double-slash:   //   at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.
 * Optional: After saving the page, delete the name after the two dashes "--" and delete the "[[(talk)...]]" link.
 * Please use "There are no announcements at this time." if the announcements are empty.
-* URL to the RSS feed via FeedBurner (for Samsung display): http://feeds.feedburner.com/UCSBNanofab-Announcements?format=xml
+* URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&action=feed&feed=rss
-* URL to the RSS feed directly from Wiki: https://www.nanotech.ucsb.edu/wiki/index.php?title=Template:Announcements&action=feed&feed=rss
+* URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&action=feed&feed=rss
@@ Line 86: / Line 56: @@
 ===== NanoFab making LN2 icecream =====
 Tomorrow the NanoFab will be serving liquid nitrogen ice cream.
+// [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)
-// ~~~~
 ************* (end of example) **************
-The ~~~~ will be replaced with your username & timestamp after you submit the post.
+The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username & timestamp after you submit the post.
 ---------------------------------------------->