From UCSB Nanofab Wiki
Revision as of 11:47, 28 August 2022 by John d (talk | contribs) (Cl2 down)
Jump to navigation Jump to search

Important Announcements

All Chlorine gasses disabled

There is a leak in our Cl2 gas cabinet that we are currently addressing.

All Cl2 processes will be down until we have finished replacing the necessary lines/fittings. Tools will most likely be down all day tomorrow and part of Tuesday. We will have a better estimate once we break open the lines.

An email will go out once we have an update. // John d 12:47, 28 August 2022 (PDT)

ASML Up; Network status

We are running a newer computer; Nanofiles sync & JobCreator functionality will be restored in the next few weeks.

// John d 09:00, 22 July 2022 (PDT)

Face-Masks Optional as of June 13

You are not required to wear a mask in UC buildings at this time. You are also not required to wear a mask in the Nanofab if desired.

We will still provide masks at the metal table in front of the cleanroom entry. See the UCSB announcement at this link.

See the full policies at COVID-19_User_Policies // John d 11:20, 13 June 2022 (PDT)

New EBL Rates

Effective Dec.1, 2021, all of our electron beam lithography rates are lowered. The new rates are as follows:

Industrial Users: $405/hour

UC Academic Users: $126/hour

Non-UC Academic Users: $150/hour

UCSB CNSI Incubator USers: $260/hour

//Thibeault 12:21, 9 December 2021 (PST)