From UCSB Nanofab Wiki
Revision as of 07:24, 10 May 2022 by John d (talk | contribs) (F50 up)
Jump to navigation Jump to search

Important Announcements

F50 UP

The Filmetrics F50 Wafer Mapper is repaired and up.

Tool has been relocated to Bay 7, just before the EBL room. // John d 07:24, 10 May 2022 (PDT)

F10-RT Down

The Filmetrics F10-RT is down for possible failed harddrive. We are working to repair it.

The Filmetrics F40-UV, also in Bay 4, can do similar reflectance measurements (but not transmission measurements).

If you need transmission measurement, the Woolam Ellipsometer can do this, but may need some work to produce identical results (figuring out sample holders etc.). Let us know if you need that. // John d 08:40, 4 May 2022 (PDT)

LEXT Confocal: DOWN

LEXT Confocal microscope is down, please check email for updates. For general motorized microscopy, you may consider the new Olympus DSX-1000. // John d 16:08, 21 March 2022 (PDT)

New COVID protocols

Please read the linked letter below (on Wiki) regarding masking policy changes, effective Saturday, March 19.

The nanofab will follow this policy with masks being optional for everyone in all sections of the facility beginning March 19.

All users must adhere to the campus policies as outlined in the letter from Chancellor Yang, including testing where required.

Link: March 16th 2022- Letter from Office of the Chancellor

See the full policies at COVID-19_User_Policies // John d 16:08, 21 March 2022 (PDT)

New EBL Rates

Effective Dec.1, 2021, all of our electron beam lithography rates are lowered. The new rates are as follows:

Industrial Users: $405/hour

UC Academic Users: $126/hour

Non-UC Academic Users: $150/hour

UCSB CNSI Incubator USers: $260/hour

//Thibeault 12:21, 9 December 2021 (PST)