Tutorials

The following are various tutorials from our NanoFab Wiki, collected here for your convenience.

<hr\>

Fabrication Tracking and Process Design

Designing experiments, tracking your fabrication steps/process improvements, and keeping track of your results are key to achieving repeatable and improved results!

See this tutorial for example Travelers, Design of Experiments, and Manufacturing Execution Systems:

• Processing | Experiment Setup

Examples of Trello + Google Drive for tracking fabrication jobs

Tracking to-do and completed tasks. Example Job Folder on Google Drive with in-process traveler, microscope/SEM images, testing results etc.

Example job card for a fabrication run.

CAD/Drawing Mask Plates

Here are pages to help you design your devices in drawing programs, and make photomasks (aka. "masks" or "reticles") for various systems in our lab.

KLayout: example CAD file.

Microfabrication CAD drawings are simple 2D drawings with layers, even though they are intended to become 3D devices through the fabrication process. The fabrication is all top-down, hence only 2D patterning is used.

• Calculators + Utilities > CAD Layout and Mask Design - links to drawing programs and tutorials
• Calculators + Utilities > CAD Design Tips - key concepts you should utilize in your drawings, and tips for setting up your CAD programs
• Calculators + Utilities > Example CAD File - example stepper mask CAD files, including advanced layout for multiple experiments.
• Calculators + Utilities > CAD Files & Templates - example GDS/OAS files for various useful structures (alignment marks, verniers, fonts etc)

Stepper Mask Tutorials

Click for Stepper Reticle Tutorial Stepper Reticle Patterns (“images”) can optionally be much more sophisticated and flexible than contact plates.

• Stepper Reticle Layout vs Wafer Layout (Demis D. John) - explains how Stepper mask layout is very different than other litho systems.
• Stepper Reticle Layout (Advanced) - Complex Experiments and Variations - If you need many design variations on your wafer.

Mask Making Guidelines

Info for mask/CAD layout for specific tools.

• Photomask Ordering Procedure for UCSB Users - see this page for how to submit your order into the purchasing system.

• Stepper Mask-Making Guidelines - Info needed to design and order a reticle for our Stepper systems.
• ASML-specific Mask Making Guidelines (Private) - More detailed info to design and order a reticle for this specific ASML system.
  • Access is restricted to trained users only by ASML's requirement - please contact tool supervisor for access.

• Autostep 200 Mask Making Guidance - information on designing and ordering your photomasks for the GCA AutoStep 200.
• GCA 6300 Mask Making Guidance (Work in progress) - GCA 6300 Stepper
• Mask Making Guidelines - Contact Masks - for the MJB-3 & MA6 Contact Aligners
• MLA150 - Design Guidelines - for the Heidelberg MLA150 Direct-Writer

Lithography Tutorials

• Lithography Calibration - Analyzing a Focus-Exposure Matrix (FEM) - Projection litho systems (steppers, direct-writers) usually require a lithography calibration, using a Focus-Exposure Matrix/Array (FEM/FEA).
• Lift-Off Description/Tutorial - How it works, process limits and considerations for designing your process.