Tool List

Lithography

You can see our available photoresists on the Chemical Datasheets page.

Suss Aligners (SUSS MJB-3) IR Aligner (SUSS MJB-3 IR) DUV Flood Expose Ovens 1, 2 & 3 (Labline) Oven 4 (Fisher) Oven 5 (Labline) High Temp Oven (Blue M) Vacuum Oven (YES) Holographic Lith/PL Setup (Custom)

Stepper 1 (GCA 6300) Stepper 2 (AutoStep 200) Stepper 3 (ASML DUV) E-Beam Lithography System (JEOL JBX-6300FS) Nano-Imprint (Nanonex NX2000) Contact Aligner (SUSS MA-6)

Vacuum Deposition

E-Beam 1 (Sharon) E-Beam 2 (Custom) E-Beam 3 (Temescal) E-Beam 4 (CHA) Removed Sputter 3 (AJA ATC 2000-F) Sputter 4 (AJA ATC 2200-V) Sputter 5 (Lesker AXXIS)

PECVD 1 (PlasmaTherm 790) PECVD 2 (Advanced Vacuum) Thermal Evap 1 Thermal Evap 2 (Solder) ICP-PECVD (Unaxis VLR) Ion Beam Deposition (Veeco NEXUS) Molecular Vapor Deposition Atomic Layer Deposition (Oxford FlexAL)

Dry Etch

RIE 2 (MRC) RIE 3 (MRC) RIE 5 (PlasmaTherm) Si Deep RIE (PlasmaTherm/Bosch Etch) DSEIII (PlasmaTherm/Deep Silicon Etcher) Ashers (Technics PEII) UV Ozone Reactor CAIBE (Oxford Ion Mill)

ICP Etch 1 (Panasonic E626I) ICP Etch 2 (Panasonic E640) ICP-Etch (Unaxis VLR) Plasma Clean (Gasonics 2000) XeF2 Etch (Xetch) Plasma Activation (EVG 810) Vapor HF Etch

Wet Processing

Wet Benches Solvent Cleaning Benches Spin Coat Benches Develop Benches Toxic Corrosive Benches HF/TMAH Processing Benches Plating Bench

Gold Plating Bench Critical Point Dryer Spin Rinse Dryer (SemiTool) Chemical-Mechanical Polisher (Logitech)

Thermal Processing

• Rapid Thermal Processor (AET RX6)
• Strip Annealer
• Tube Furnace (Tystar 8300)
• Tube Furnace Wafer Bonding (Thermco)
• Tube Furnace AlGaAs Oxidation (Linberg)
• Wafer Bonder (SUSS SB6-8E)
• Ovens 1, 2 & 3 (Labline)
• Oven 4 (Fisher)
• Oven 5 (Labline)
• High Temp Oven (Blue M)
• Vacuum Oven (YES)

Packaging

• Dicing Saw (ADT)
• Flip-Chip Bonder (Finetech)
• Vacuum Sealer
• Wire Saw (Takatori)

Inspection, Test and Characterization

Field Emission SEM 1 (FEI Sirion) Field Emission SEM 2 (JEOL 7600F) Step Profile (Dektak IIA) Step Profilometer (Dektak 6M) Ellipsometer (Rudolph) Microscopes Probe Station & Curve Tracer Optical Film Thickness (Filmetrics F20) Optical Film Thickness (Microscope-Mounted Filmetrics XYZ) Optical Film Thickness (Nanometric) Goniometer

Film Stress (Tencor Flexus) SEM Sample Coater (Hummer) Surface Analysis (KLA/Tencor Surfscan) Photo-emission & IR Microscope (QFI) Ellipsometer (Woollam) Resistivity Mapper (CDE RESMAP) Laser Scanning Confocal M-scope (Olympus LEXT) Deep UV Optical Microscope (Olympus) Fluorescence Microscope (Olympus MX51) Atomic Force Microsope (Dimension 3100/Nanoscope IVA)